Motorola MOTONAV T805 Manual page 11

English
Set up navigation system
Start Bluetooth on phone
Before setting up MOTONAV, ensure the Bluetooth feature is turned on in your phone. To turn on Bluetooth on
Motorola phones:
Press (Main Menu) > Settings > Connection (or Connectivity) > Bluetooth Link > Setup.

 Scroll to Power
3 Select Change
Scroll to On
4
5 Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off
Note: These steps are for most Motorola phones. For all other phones, see your phone's user guide.
Turn on GPS receiver
To begin setting up MOTONAV, you must first turn on the Bluetooth GPS receiver. To turn on your GPS receiver,
press and hold the Power button until the Battery Status indicator is lit. After a few moments, both the GPS and
Bluetooth indicator lights begin flashing.
See figure  on page .
Power button

 Bluetooth indicator light
3 GPS indicator light
Battery status indicator light
4
Configure MOTONAV
Follow these steps to configure MOTONAV to operate with your navigation system.
 If using a Nokia series 40 phone (5200, 5300, 6111, 6211, 6230i, 6233, 6234, 6280, and others), perform the
following steps:
(For all other phones, go to step .)
a Go to Applications and highlight MOTONAV (but do not start it).
b Select Options > Application access > Communication > Network access > Always allowed.
c Select Options > Application access > Communication > Connectivity > Always allowed.
d Select Options > Data/Phone access > Read user data > Always allowed.
e Select Options > Data/Phone access > Add and edit data > Always allowed.
8