JAB SKYLINE BF 50 Installation Instructions

Installation on horizontal surface / Mounting on glazing beads [D1]
Take care not to damage the product with a sharp knife when opening!
Screw assembly: Use screwdriver size 2 (POZIDRIVE). Do not use an electric
screwdriver.
1
Mounting of cover caps
1
Mounting of bracket (upper rail) 4 Bediening
2
Mounting of bracket (lower rail) 4 Bediening
3
Subject to technical changes
Sequence of mounting rails
4
B
C
A
Wichtiger Hinweis (Abstand zwischen Glas und Stoff ):
Positioning of the fixation hooks
Senkrecht-
Stoff e
5
fenster
Blickdichte Stoff e min. 3 mm
- Clip on the pleated blind with lower rail, fold out completely
Abdunkelnde Stoff e min. 5 mm
- Mark boreholes in the glazing bead to match the fabric eyelet
- Detach pleated blind, set boreholes,
Insert screw hooks – Final assembly as per drawing.
Important notice (clearance between glass and fabric):
Fabrics Vertical windows
Non-transparent fabrics
Dim-out fabrics
BF 50/51, BF 55
Disassembly of rails: Use a flat screwdriver, size 2.
Please only use the original screws enclosed with the delivery!
Width of installation
0 – 80 cm
81 – 120 cm
Sequence of clipping rail
4-A1
4-C1
Dachfl ächen- Plafond-
fenster fenster
min. 10 mm min. 100 mm
min. 10 mm min. 100 mm
Skylights Ceiling windows
min. 3 mm min. 10 mm min. 100 mm
min. 5 mm min. 10 mm min. 100 mm
Number of component parts
4 4 var
6 6 var
X = 5 cm
x x
max. 70 cm
4-A2
4-C2
Disassembly
B
C
A
A
C
B
4
6
x
x