Waterhouse PC-01 User Manual

Pond Cleaner Pump PC-01
Use manual.
Thank you for purchasing and use Jebao pond cleaner Pump（PC-01 for short） ，using of
the PC-01，you Can easily removes the debris from your garden pond. Thanks to the
continuous vacuum process and automatic emptying of PC-01, you can greatly save time.
For optimum performance and more efficient use, avoid improper usage and maintenance,
failure to follow the instructions and warnings in this manual may result in pond vacuum
damage and/or serious injury. Please be sure to read, thoroughly understand, and save this
manual for future reference.
USE SCOPE：
It is used for outdoor garden ponds, waterscape，waterfalls, fountain, and koi pond etc. By
cleaning and filtering the debris such as plant seeds, seeds cases，falling leaves, it will
create a better living environment for the fish and other hydro bios.
PRODUCT FEATURES
1. High performance and energy saving, wear well
High performance standard asynchronous motor with new design , energy saving,
larger suction, larger flow, removes debris up to 25 mm; adopt wear proof ceramic
shaft which can be used in a longer time.
2. Adjustable telescopic handle, Convenient and practical
Adjustable telescopic handle, when you don't use the PC-01, you can shorten the
Adjustable telescopic handle length, reducing handle occupy space. When you want to
use the PC-01, you should pull the handle from the pipe.
3. Remote control on/off switch, ease of use
The wireless controller can make you comfortable for standing down and longer distance
operation.
4.Motor part of the epoxy potting，have good grounded，safe with human, adult fish.
5. Easy to deposit and set up.
INSTALLATION：
1. To select the suitable Brush head according to different requirement， (Step 1) 。
2. Closed the connect buckle (Step 2) ，note the buckle closed and in right place。
3. Install the elbow pipe (Step 3) ，screw up clockwise, screw off anticlockwise
4. Connect the hose to the outer connector (Step 4), be sure not to curve ，tread and bend
the hose. Don't use it when the hose damaged.
5. Install the outer connector to the outlet of elbow pipe and screw up the nut (Step 5).
6. Install the adjustable handle to the pipe of pond cleaner, (see step 6), then adjust it to a
suitable length.
7.spin the Aluminium tube to a suitable place according to the arrowhead, then screw up
the Aluminium on a opposite direction (Step 7) 。
8. put the battery in the handle box, be sure
OPERATING INSTRUCTION:
1. Put the PC-01 to the edge of the pond, then pull the hose to the collect box and fix it,
be sure not to contort the hose.
2. Double check to install the PC-01 correctly, connect the power, put it to the water.
Seize the handle with your right hand, hand the aluminum tube on the left, push the
lock button, then pull the handle off the bottom, loosen it. Be sure to switch on the
power after the PC-01 is in the water. don't use it without water, or it can damage the
PC-01
3. When finishing the cleaning, push the lock button with your right thumb, pull the
handle, then loosen it.
4. Pull the PC-01 out of the water and tidy it.
Remark：
When you find there is something wrong with the PC-01, such as the sundries block
the housing or the water from the hose change, you should clean the sundries.
（Step 8） 。
the place of anode and cathode