Summary of Contents for Runfine RF421186
- Page 1 Model: RF421186/RF422186/RF425186 Free standing bathtub faucet Operators’ Manual Parts and Customer Services: info@runfinegroups.com...
- Page 2 Part list Part Parts description Quantity ① Main body Straight tube ② Decorative cover ③ ④ Inlet tube ⑤ Bolts holder Expansion bolts ⑥ Hand shower ⑦ ⑧ Shower hose ⑨ Glove Instruction ⑩ ⑪ Screw tool ⑫ Adaptor...
- Page 3 INSTALLATION MANUAL TOOLS REQUIRED BUT NOT INCLUDED Pipe tape Adjustable wrench Philips screwdriver Notes before installation : 1.Please check that all components are present. 2.Before installation ensure that all pipe lines are clear of sundries to block the faucet. 3.Ensure water pressure is between 20-125 PSI (includes combination of hot and cold hose lines).
- Page 4 1.Connect ② the straight tube,③ decorative cover and ⑤Bolts holder to ④ Inlet tube, then screw ④ Inlet tube to ① the main body. 2.Connect ① the main body with ② the straight tube by using ⑪ screw tool. Remark: ⑪ Screw tool also need to use When you need to clean the cartridge.
- Page 5 4.Screw ⑫ the adaptors on the wateroutlet if you need, then connect ④ the inlet tube like the drawing. 5.Twist ⑤ the bolts holder to the faucet. 6.Drill holes on the floor based on the drawing (unit:mm).
- Page 6 7.Put 3 pcs ⑥ Expansion bolts onto ⑤ Bolts holder,tighten up the expansion bolts by wrench. 8.Twist ⑧ Shower hose to both main faucet and ⑦ hand shower. 9.Double check the entire installation for any leaks and make sure the faucet is functioning.