Qlight SEWN30E Instruction Manual

Electric Horns for Vessels and Heavy Industries Applications
SEWN30E/ SEWN30L/ SEWN30T
114
30 50
66
HORN
Thank you for purchasing Qlight's products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to fire, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, fire, electric shock and loss of life.)
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product
that would void the warranty.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn off the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product's specification.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.
Ordering Specifications
SEWN30T - WA
[Model
[Sound]
number]
| |
• SEWN30E • WS-Warning
• SEWN30L
sounds
• SEWN30T
• WP- Special
warning
sounds
• WM-Melodies
• WA-Alarms
• WV-
Customizable
sounds
Please scan the QR code for more
detailed product information.
www.qlight.com
120
- 24 - LC
[Sound
[Voltage]
selection]
| |
• 12 - DC12V • (blank)
• 24 - DC24V
-Built-in switch
• 110 - AC110V
• LC
• 220 - AC220V
-External
contac
Product Specifications
Model
Voltage Current
number
DC12V 2.211A
SEWN30E
Wall mount
DC24V 1.022A
SEWN30L
Self stand
SEWN30T
AC110V 0.226A
Wall mount
with
terminal box
AC220V 0.113A
※ CE compliant : AC220V, DC24V
※ CCS compliant : SEWN30E only
※ Max. built-in volume feature is based on WS, WP-Ch1 / WM-Ch4 / WA-Ch4.
※ In case of customized WV 5 tone type, there may be difference of volume
depending on user's audio file type
• Protection rating : IP66
• Ambient operating temperature : -30°C to +50°C
1
Sound pattern
Certificates
and volume
• WS-5 Warning
Sounds : Max.114dB
• WP-5 Special
warning sounds
: Max.114dB
• WM-5 Melodies
: Max.110dB
• WA-5 Alarms
: Max.114dB
• WV-5 Customizable
sounds : 108-113dB
Weight
• SEWN30E
DC-1.76kg
AC-2.11kg
• SEWN30L
DC-1.74kg
AC-2.13kg
• SEWN30T
DC-2.23kg
AC-2.58kg