Advertisement
Quick Links
Owners Manual and Safety Instructions
Read and Save this Manual.
Keep this manual for the safety warnings and precautions. Refer to this manual for operating,
maintenance and inspection procedures. Log the items serial number on the front of this manual. Keep
purchase receipt with this manual in a safe dry location for future reference.
For help with this product please visit our website at
www.xrack.us/help or call 888-998-5739 or 516-338-0884
for assistance. Never overload the rated weight of the
vehicle's load capacity which may be lower than the rating
of the accessory rack. Some tools are not included for
installation to the vehicle.
WARNING
!
Do not operate with unstable loads
Do not load beyond rated capacity
Always strap load securely
Distribute load evenly
Do NOT sit, Stand or ride on
Do NOT exceed 65 MPH with Carrier attached
Follow DOT Guidelines for installation and use
X-ROCKET FISHING ROD HOLDERS.
Models: XR-RH-S-P, XR-RH-S-D, XR-RH-AD-S-P, XR-RH-AD-S-D
Single and Double Rod Configurations
ADVERTENCIA
!
No opere con cargas inestables
No cargue más allá de la capacidad nominal
Siempre cargue la carga de forma segura
DISTRIBUIR carga uniformemente
No se siente, se pare o monte
NO exceda 65 MPH con Carrier adjunto
Siga las pautas DOT para instalación y uso
X-RACK
Bethpage, NY USA
2021+ Ford Bronco edition
.
READ THIS MANUAL BEFORE USING THIS
PRODUCT. FAILURE TO DO SO CAN RESULT IN
SERIOUS INJURY. SAVE THIS MANUAL
!
Ne pas utiliser avec des charges instables
Ne chargez pas au-delà de la capacité nominale
Toujours attacher la charge en toute sécurité
DISTRIBUER charge uniformément
Ne pas s'asseoir, se tenir ou monter sur
Ne dépassez PAS 104 kilomètres à l'heure avec le transporteur attaché
Suivez les directives des autorités pour l'installation et l'utilisation
info@xrack.us
WARNING
ADVERTISSEMENT
v1
Advertisement
Summary of Contents for XRACK XR-RH-S-P
- Page 1 Log the items serial number on the front of this manual. Keep purchase receipt with this manual in a safe dry location for future reference. X-ROCKET FISHING ROD HOLDERS. Models: XR-RH-S-P, XR-RH-S-D, XR-RH-AD-S-P, XR-RH-AD-S-D 2021+ Ford Bronco edition Single and Double Rod Configurations...
-
Page 2: Installation Instructions
PVC inserts. Some poles butts are large and will not fit with insert. To install PVC inserts, wet with a bit of soapy water then insert into the X-Rocket. Install lock bars on part XR-RH-S-D and part XR-RH-S-P so locks are on hood side of bracket. Install Add On Bracket lock bars so lock is on the bottom. - Page 3 Installation Instructions Lock Bar Hardware Add-On Rod Holder Single Rod Holder Hardware Hardware to Bronco Trailsight. Step 2 Step 1 Remove male bolts from Bronco trail sight. Female bolts will be used Protect hood and fender and layout all parts. for the X-Rocket install.
-
Page 4: Safety Information
Safety Information 1. Read all instructions before using this product 2. Check for missing or damaged parts 3. Do not exceed the vehicle maximum load capacity. 4. Always distribute load evenly. Heavier poles should be on the inner rod holder when set up for dual rods. 5. - Page 5 LIMITED WARRANTY B&R Innovations, LLC (B&R) warrants this product to be free of defects in material and workmanship during the warranty period. Our warranty obligation is to provide a replacement for a defective original part if the part is covered by the warranty, after we receive a proper request from the warrantee (you) for warranty service. Who may request service? Only a warrantee may request service.