Advertisement
Quick Links
Installation Instructions for
3cm Countertops and Undermount Sinks
(Models: 050, 080 & 090)
BEFORE YOU REMOVE THE TOP FROM THE CARTON
Prior to removing the countertop from the carton inspect the carton for damage and package contents.
If any damage is found, contact your place of purchase.
Products shown in this manual do not reflect a specific vanity or sink.
Advertisement
Related Manuals for JAMES MARTIN VANITIES 050
Summary of Contents for JAMES MARTIN VANITIES 050
- Page 1 Installation Instructions for 3cm Countertops and Undermount Sinks (Models: 050, 080 & 090) BEFORE YOU REMOVE THE TOP FROM THE CARTON Prior to removing the countertop from the carton inspect the carton for damage and package contents. If any damage is found, contact your place of purchase.
- Page 2 • Ensure the vanity cabinet is in place and has been properly installed to meet plumbing codes. For your safety and to achieve the best possible results, James Martin Vanities recommends you consult with a professional contractor. • Shut off the water supply. Water supply and drain access must be in place prior to installing the countertop and sink.
- Page 3 Installation Instructions for 3cm Countertops with Undermount Sink SINK INSTALLATION 4. Carefully lift the sink from the countertop and place it on a soft surface, bowl side down. Apply a bead of silicone IMPORTANT: Make sure all surfaces are clean. sealant around the top edge of the sink rim.
- Page 4 • Ensure the vanity cabinet is in place and has been properly installed to meet plumbing codes. For your safety and to achieve the best possible results, James Martin Vanities recommends you consult with a professional contractor. • Shut off the water supply. Water supply and drain access must be in place prior to installing the countertop and sink.