Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
DESCRIPTION
The DCSS/DCCBB is a Doorbell Communicator that is used with the DCH4 to provide keyless entry
control with the MRC88CTL. The DCSS is a stainless steel version. The DCCBB is a cool bronzed
black version. Both DCSS and DCCBB mount into a single gang box.
SPECIFICATIONS
Power: Telephone line powered (18VDC 20mA minimum)
Dimensions:
o Faceplate: 123.8mm x 79.4mm x 4.6mm (4.875" x 3.125" x 0.18")
o Phone: 71mm x 46mm x 42mm (2.8" x 1.8" x 1.65")
Shipping Weight: 0.45 kg (1.0 lbs)
Environmental: -32C to 54C (-25F to 130F) with 5% to 95% non-condensing humidity.
Speaker Volume: Approximately 62dB maximum @ 1m
Ring Voltage: 25VAC RMS minimum (for auto answer)
CPC Disconnect Time: 300ms minimum
REN: 0.8A
Connections: (2) gel-filled butt connectors
08905108C
DCSS/DCCBB
Doorbell Communicator
- 1 -
Advertisement
Summary of Contents for Xantech DCCBB
- Page 1 The DCSS/DCCBB is a Doorbell Communicator that is used with the DCH4 to provide keyless entry control with the MRC88CTL. The DCSS is a stainless steel version. The DCCBB is a cool bronzed black version. Both DCSS and DCCBB mount into a single gang box.
- Page 2 INSTRUCTIONS The DCSS/DCCBB is designed to be flush mounted into a standard single gang Rough-In box with a minimum inside dimension of 1.70” deep x 2.00” wide x 2.84” tall. A. New Construction Flush Mounting Step 1. Front of box should stick out approximately ½" from front surface of wall stud (this may vary depending on the walls sheathing and siding thickness).
- Page 3 DCSS/DCCBB phone goes off-hook, much like a standard speaker phone. In the event that the line is busy, the DCSS/DCCBB will hang-up. The DCSS/DCC will also automatically hang up on CPC, silence, busy signal, return to dial tone or time out. The DCSS/DCCBB will also answer any incoming call.
- Page 4 Installation Instructions, DCSS/DCCBB © 2007 Xantech Corporation, Document #08905108C This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Corporation. Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document.