Advertisement
Quick Links
Manual-wind 3-Hand Date
Setting The Time
1.
Pull the crown out to the 2nd position.
2.
Turn the crown to set Hour and Minute Hands.
3.
After the time is set, push the crown back to the Normal position. This will ensure
proper water resistance.
Setting The Date
1.
Pull the crown out to 1st position.
2.
Turn the crown clockwise to set the date.
* Please be mindful of AM/PM when setting the date.
3.
After the date has been set, push the crown back to Normal position. This will ensure
proper water resistance.
Ellum
JM-H303-002
Sellita Caliber SW210-1
Hour Hand
Second Hand
Minute Hand
Date Window
2nd Position
1st Position
Normal Crown Position
Advertisement
Summary of Contents for Jack Mason Ellum
- Page 1 Ellum Manual-wind 3-Hand Date JM-H303-002 Sellita Caliber SW210-1 Hour Hand Minute Hand Date Window 2nd Position Second Hand 1st Position Normal Crown Position Setting The Time Pull the crown out to the 2nd position. Turn the crown to set Hour and Minute Hands.
- Page 2 Winding the watch In the Normal position, turn the crown clockwise repeatedly to wind the mainspring and get the second hand to start sweeping. From the full stop It should take 18-20 full rotations to mostly wind the watch. The SW210-1 has about 40 hours of power reserve when fully wound.