Advertisement
Quick Links
Advertisement
Related Manuals for NCR 1668-2000
Summary of Contents for NCR 1668-2000
- Page 1 INSTALLATION GUIDE NCR 1668-2000 iPad Stand (7641) Release 1.0 B005-0000-2323 Issue A...
-
Page 2: Revision Record
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current. - Page 3 NCR 1668-2000 iPad Stand Introduction The NCR 1668-2000 iPad Stand provides mounting hardware remote mount an Apple iPad. An Allen wretch is included for display angle adjustment.
- Page 4 NCR 1668-2000 iPad Stand Display Viewing Adjustments The Display Bracket can be rotated to display the iPad horizontally or vertically. The Display Bracket can also be tilted 180 degrees from front to rear for customer viewing/input.
-
Page 5: Installing The Ipad
NCR 1668-2000 iPad Stand Installing the iPad The iPad Bracket is spring loaded. 1. Loosen the thumbscrew on the iPad Bracket. - Page 6 NCR 1668-2000 iPad Stand 2. Insert the edge of the iPad onto the bottom half of the bracket and press down to spread the bracket apart sufficiently to accept the iPad. 3. Insert the top edge of the iPad into the top of the bracket and then allow the spring tension of the bracket to grasp the iPad.
- Page 7 NCR 1668-2000 iPad Stand NCR Mobile Gateway Controller Integration The stand can be used to integrate the iPAD on the NCR Mobile Gateway Controller. The stand is secured with two screws into the top of the MGC (includedwith the MGC).