WARNING
* Switch off the main electrical supply from the main fuse box / circuit breaker before installation.
* Inspect item carefully before attempting to install.
* If there is any damages or obvious defects, do not install.
* Item may not be returned once it has been installed.
CARE AND MAINTENANCE
* To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a
solvent) to wipe the surface of the fixture.
* To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or
by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never
a solvent) to wipe the interior surface of the fixture.
* Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe
carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
** WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN **
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced
If the cord is damaged, the lamp shall be destroyed
Option 1:Portable lamp with plug
PIECE
DESCRIPTION
PICTURE
A
Plastic Anchors
B
Mounting Plate
C
Tapping Screw
D
Ground Screw
Mounting
E
Screw
Part List and Hardware List
QUANTITY
PIECE
DESCRIPTION
2X
F
Lamp body
1X
G
Shade
2X
H
socket ring
1X
I
Bulb
4X
PICTURE
QUANTITY
1X
1X
1X
1X
1/4
Model#: SCN4146
Product Dimensions: 9.75"L X 12.5"D X
12.5"H
Note: 2 Assembly Options
Option 1:Portable lamp with plug
Option 2:Hard wired