Advertisement
Quick Links
WARNING
** WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN **
* Switch off the main electrical supply from the main fuse box / circuit breaker before installation.
* Inspect item carefully before attempting to install.
* If there is any damages or obvious defects, do not install.
* Item may not be returned once it has been installed.
CARE AND MAINTENANCE
* To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a
solvent) to wipe the surface of the fixture.
* To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by
removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a
solvent) to wipe the interior surface of the fixture.
* Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe
carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
PIECE
DESCRIPTION
PICTURE
A
mounting plate
B
Screw
C
Anchor
Outlet box
D
screw
E
wire connector
Mounting
F
screw
G
Backplate
Part List and Hardware List
QUANTITY
PIECE
DESCRIPTION
1X
H
Handle
4X
I
Bulb
4X
J
Iron Shade
2X
K
Lamp Arm
3X
L
Tube plug
4X
M
ground screw
1X
Model#: SCN4092
Product Dimensions: 5.875"L X36.5"W
X24.5"H
PICTURE
QUANTITY
1X
1X
1X
1X
1X
1X
1/3
Advertisement
Related Manuals for Safavieh Lighting Moxley
Summary of Contents for Safavieh Lighting Moxley
- Page 1 WARNING ** WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN ** * Switch off the main electrical supply from the main fuse box / circuit breaker before installation. * Inspect item carefully before attempting to install. * If there is any damages or obvious defects, do not install. * Item may not be returned once it has been installed. CARE AND MAINTENANCE * To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. * To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by Model#: SCN4092 removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a Product Dimensions: 5.875"L X36.5"W solvent) to wipe the interior surface of the fixture. X24.5"H * Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully. NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation Part List and Hardware List PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY mounting plate...
- Page 2 PREPARATION * Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. * If any part is missing or damaged, do not attempt to assemble the product. * Estimated Assembly Time: 20 minutes. * Tools Required for Assembly (not included): Screwdriver, Junction box * If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com NOTE: PLEASE USE TYPE"A" BULB MAX 25‐WATT OR LED BULB MAX 9‐WATT, THERE IS LED 5‐WATT BULB IN THE BOX Installation to the wall Step 1: First mark the position of the rubber plug hole with the mounting plate (A), punch holes on the wall and install the anchor (C),and then fix the mounting plate (A) on the wall with screw (B) . Step 2: Fix the lamp arm (K) on mounting plate (A) with mounting screw (F). Step 3: Then loosen the handle (H), adjust the height of the lamp body, rotate the iron shade (J), adjust the position of the iron cover, rotate the lamp arm (K) from side to side, and install the bulb (I) into the socket after adjusting the position. Step 4: Put the plug into the plugbase.
- Page 3 Installation to outlet box Step 1: First mark the position of the rubber plug hole with the mounting plate (A), punch Step 2: Keep the length of the fixture wire at least 6 in. from the center of the backplate (G) and cut holes on the wall and install the anchor (C), and then fix the mounting plate (A) on the the fixture wire. Then use the wire strippers (not included) to separate approximately 1/2 in. of the junction box with screw (B) and outlet box screw(D) insulated wire. Step 2: Wire connection Connect fixture neutral wire (ribbed) to the outlet box neutral wire (usually white) using a wire connector. Connect fixture hot wire (smooth with markings) to the outlet box hot wire (usually black) using a wire connector. CAUTION: Do not reverse the hot and neutral connections Grounding Instructions: Wrap ground wire from outlet box around green ground screw(M) on mounting Step 4: Install the tube plug (L) at (G1), then loosen the handle (H), adjust the height of the bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied lamp body, rotate the iron shade (J), adjust the position of the iron cover, rotate the lamp with a ground wire, connect to outlet ground wire with a wire connector. arm (K) from side to side, and install the bulb (I) into the socket after adjusting the position.