Related Manuals for Ocular IOCAP06C-7 4G
Summary of Contents for Ocular IOCAP06C-7 4G
- Page 1 OCULAR IQ DUAL TOWER USER MANUAL Version 2.0 IOCAP06C-7 4G / IOCAP06C-7T 4G ocularcharging.com.au IOCAP06C-22 4G / IOCAP06C-22T 4G sales@ocularcharging.com.au 1300 912 650 IOCAP06C-22T 4G-CC...
- Page 2 Welcome to your Ocular IQ Dual Tower Warning: This product shall only be installed, repaired or serviced by an authorised electrician. All applicable local, regional and national regulations for electrical installations must be respected.
- Page 3 FAQs Resource Library Access here Access here Follow the links or scan to QR codes to access all our user manuals and technical documents. You will also find answers to the most common questions we receive...
- Page 4 How to start a charging session The IQ Tower charger can be configured in several different ways including, plug and charge (no user authentication), press button to start (no user authentication), RFID authentication or start through OCPP. The selection and configuration of these different modes is set up during the commissioning of the charger by your installer.
- Page 5 4. Start through OCPP If the charger has enabled OCPP, please following the OCPP provider’s guidelines to start a charging session. If a RFID card is linked to an existing user’s account in the OCPP platform, you can start a charging session by pressing the button on the corresponding side of the charger to select a port, then swiping the RFID and a charging session will be started under that user’s account.
-
Page 6: Troubleshooting
Troubleshooting Problems Solutions SuspendedEVSE means the charger has paused the charging session, this is because there’s not enough power available to charge the car. In general, it requires more than 6.1 A to start a charging session. Once there’s enough power, the session will be automatically started. The charger is If the problem persists, please contact us for further showing... - Page 7 1300 912 650 sales@ocularcharging.com.au...