Hafco PCT-7510 Assembly Instructions

10 - 16
kg
Use proper lifting techniques
CAUTION
16 - 40
kg
Use proper lifting techniques
CAUTION
40 +
kg
Use proper lifting techniques
WARNING
Suggestion of what you will need
Note - this assembly guide is merely a recommendation and should not be followed blindly, if you do not have the
equipment or the experience necessary to complete this project you should consider seeking advice from a
professional.
• 'G' Clamps (or alternative) with an opening of at least 100mm to secure the table in place during welding..
• MIG or TIG welder
• Angle grinder fitted with a fine flap disc
• Level and square to enure all components are square before welding
• Engineers file, M6 & M8 hex keys, spanners or shifting spanner and a soft face hammer
NOTE:
You may consider to use other methods and tools to help complete you project, the above list is
just a suggestion. read through these instructions before starting the assembly process.
Getting Started
Before starting the assembly ensure you have the correct tools & equipment to successfully assemble the table
whilst making sure you are wearing the appropriate Safety PPE.
Check for Burrs
It is normal for the components to have small burrs or minor imperfections as part of the laser cutting process. While
wearing protective gloves, check the edges of the individual pieces and visually inspect them for any small burrs.
If you do happen to find one, use a file to remove any burrs, being careful not to remove too much excess material as
it may affect the end result.
Clean Components
The components are supplied painted to protect it from rust, however, paint must be removed before any welding
can take place.
10 - 16
kg
Use proper lifting techniques
CAUTION
16 - 40
kg
PCT-7510 PLASMA CUTTING TABLE
Use proper lifting techniques
CAUTION
Due to the weight of the table, it is highly recommended that you have a second person to
assist during the build of the table, being made from steel it is heavy and help should be
obtained to avoid any injuries. Always remember to wear the appropriate PPE when
40 +
kg
working with metal and welding equipment. Refer to your welder manufacturers
Use proper lifting techniques
WARNING
recommendations for the correct settings for your welder to suit the material thickness.
10 - 16
kg
Use proper lifting techniques
CAUTION
ASSEMBLY INSTRUCTIONS
16 - 40
kg
Use proper lifting techniques
CAUTION
40 +
kg
Use proper lifting techniques
WARNING
OVERSIZE
This product requires a mechanical lifting aid
WARNING
Order Code W08602
OVERSIZE
This product requires a mechanical lifting aid
WARNING
01
FR
PETE
Page 1