Monster 2MNHP2091 User Manual

MONSTER
User manual
Name: Wireless Headset
Model: 2MNHP2091, 2MNHP2091B0L2, 2MNHP2091G0L2
Bluetooth® Version: 5.3
Supported profiles: HSP/HFP/A2DP/AVRCP
Frequency response: 20Hz-20kHz
Impedance: 32Ω
Driver: Ø50mm Integrated Dynamic Driver
Sensitivity: 106±3dB at 1KHz
Effective range: up to 10 meters
Battery capacity: 1000mAh
Playing time: Up to 60hours
Charging time: Max. 2 hours
Charging port: Type-C™
Input voltage: DC 5V / 1A
Working temperature: 0~45℃
Storage temperature: -20~70℃
Wireless Headset Operation:
Power ON:
Press and hold the "MFB" button for 2 seconds.
Power OFF:
When the power is ON, press and hold the "MFB" for 5 seconds.
Bluetooth® Pairing:
Go to "Bluetooth" Setting on your Bluetooth® device (phone, tablet, etc.), turn the Bluetooth® ON, on your device.
Press and hold the "MFB" for 5 seconds and then release it to enter pairing mode. (The LED indicator will blink red
and blue intermittently).
On your Bluetooth® device, select "Monster MAMBO M1" from the list of available devices.
Dual Connection:
You can connect to two Bluetooth® transmitting devices (phone, tablet, etc.) at the same time. Simply pause the
audio on the first device to play audio from the second device.
Aux input:
Plug the Aux 3.5mm connector of the included Aux to USB-C cable into a compatible device (computer, phone,
etc.) and plug the USB-C side to your MAMBO M1 to use it as a wired headset.
Answer call:
Single press the "MFB" button to answer a call.
End call / Reject call:
Double press on the "MFB" button to end a call, or to reject an incoming call.
Voice assistant:
Double press on the "MFB" button. (Only when connected to a Bluetooth® device that supports Voice Assistant.
This feature is not available duration a call.)
Play/Pause:
Single press the "MFB" button to play/pause music.