Advertisement
Quick Links
(Consists of: W1047-90K1, W1047-90K2, W1047-90K3)
(Consists of: W1047-90Q1, W1047-90Q2, W1047-90Q3)
(Consists of: W1047-90K1, W1047-90K2, W1047-90C3)
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent damage to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Hardware List
Advertisement
Related Manuals for Flexsteel home W1047-90K
Summary of Contents for Flexsteel home W1047-90K
- Page 1 (Consists of: W1047-90K1, W1047-90K2, W1047-90K3) (Consists of: W1047-90Q1, W1047-90Q2, W1047-90Q3) (Consists of: W1047-90K1, W1047-90K2, W1047-90C3) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent damage to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed.
- Page 2 IMPORTANT You should keep Hex Key and Spanner Wrench in a safe place as you may need to tighten up the Nuts in the future. Use a soft cloth between these parts and the floor. STEP 1 Attach the Headboard Post (E) to Headboard (A) by inserting Flat Washer, Spring Washer, Bolt and tighten with Hex Key.
- Page 3 STEP 5 Align the pre-drilled holes in the Cross Slats (D) with the cleat rail of the Side Rails (C). Secure with the Screws using a screwdriver (not included). (See Figure 5.) STEP 6 Adjust the levelers on the Slat Supports (F). (See Figure 6.)