Advertisement
Quick Links
Advertisement
Summary of Contents for Hague POSIGO P01XL
- Page 1 Modular Positioning Belt. User manual V1.0EN GMN: 872076918P01N7...
- Page 2 Package contents: Tube clamp (x2) Fixlock buckle 40mm (x2) Fixlock buckle 25mm (x2) NOT A SAFETY BELT FOR TRANSPORT! SKU: RTC For belt size XL, L, M, S For belt size XS Before installation and use, read this manual UDI-DI: 8720769180202 SKU: KG40 Check the correct belt size and associated parts: SKU: KG25...
- Page 3 Fig. 4 Fig. 5 Mounting and assembly. Mounting using tri-glides. Fig. 2 1: Secure the fixlock buckles at the desired If the wheelchair frame is not suitable for the tube clamps, the position on the wheelchair frame, using straps can also be secured using the tri-glide sliding buckles. the tube clamps (fig.
- Page 4 Fig. 11 Setup. Fine tuning for comfort or Fig. 9 additional support. 2: Make sure both rotary knobs are turned all the way to the left. This is the most relaxed position (fig. 8). The positioning belt can easily be adjusted at any time 3: Pull both straps through the Turning the rotary knobs clockwise increases the tension fixlock buckles until the positioning...
- Page 5 Integrated magnets. Optional 4-point straps. Fig. 14 Fig. 16 Fig. 17 Magnets have been incorporated into the padding, so that Additional straps can be appended using the tendons (P) both sides of the belt can be conveniently stuck to the frame in fig.
- Page 6 Replace / install buckle. Notes: Fig. 19 Fig. 20 Slide back the padding so that the metal clip is revealed (fig. 19). Hook the fastening part of the buckle behind the clip and pull firmly until the fastening part is secured in the clip (fig. 20).
- Page 7 Posigo is a registered trade mark of The Hague Care Development BV Jachtwagen 29 3897 AM Zeewolde (NL) www.posigo.nl info@posigo.nl © 2023 All rights reserved.