Page 1
“FOLD UP” Wall Mount Electric Manufactured by Height Adjustable Change Table CAN-DAN REHATEC LTD. 7-1469 Sandhill Drive Ancaster, ON L9G 0H7 Model #20-00-62 Size: 62” x 24” Phone: (905) 648-7522 Fax: (905) 648-7799 Email: info@can-dan.com Dealer INSTRUCTION GUIDE V 1.2 Read Thoroughly before Operating Manufactured in Canada by Can-Dan Rehatec Ltd.
Page 2
Description of WARRANTY Can-Dan Rehatec Ltd. As manufacturer warrants from the DATE OF DELIVERY TO THE FIRST CONSUMER that each item described below, as NEW AND UNUSED, will be free from any defects in material and/or workmanship for a period of: ...
Page 3
Maintenance TABLE OF CONTENTS Check the following regularly: Safety Precautions Check safety belts for signs of wear Clean Velcro on table top and mattress Scope of Application How to remove front acrylic cover: Lock Box & Safety Lock Remove table top ...
Page 4
Safety Precautions Operating and Handling Instructions IMPORTANT Please read these instructions carefully, note the safety instructions and warnings. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage to property ...
Page 5
Scope of Application For Load-Bearing Block Wall The Wall Mount “Fold Up” Change Table is a lifting device. Through the use of an electrically powered hand control, which is connected to a 24V actuator, the table is lowered to the height of the wheelchair, enabling the Place MAIN frame against the wall caregiver to provide transfer assistance onto the table in a safe manner.