JUNTTAN PM 20L Operator's Manual page 98

JUNTTAN
ENGINE MAINTENANCE SCHEDULE
General information
Perfom maintenance at whichever interval occurs first. At each scheduled maintenance
interval, perform all previous maintenance checks that are due for scheduled
maintenance.
Daily or Refueling - Maintenance check
• Air tank and reservoirs - drain
• Crankcase breather tube - inspect
• Engine coolant level - check/correct
• Fuel-water separator - drain
Every 250 Hours or 3 Months - Maintenance check
• Air cleaner restriction - check/correct
• Air compressor mounting hardware - check/correct
• Charge air cooler - check/correct
• Charge air piping - check/correct
• Radiator hoses - check
• Air intake piping - inspect
• Cooling fan - inspect
• Coolant level - check/correct
• Drive belts - check/correct
Every 500 Hours or 6 Months - Maintenance check
• Engine coolant antifreeze - check
• Fuel filter, spin-on-type - replace
• Lubricating oil and filters - change
Every 1000 Hours or 1 Year - Maintenance check
• Cooling fan belt tensioner - check/correct
• Fan hub, belt-driven - check/correct
Every 2000 Hours or 2 Years - Maintenance check
• Air compressor discharge line - check/correct
• Cooling system – drain/flush/fill
• Vibration damper, rubber - check
• Vibration damper, viscous - check
Every 5000 Hours or 4 Years - Maintenance check
• Overhead set - adjust
98
Routine service section
3
3
1,2,3
3
2,3
3