Routine Service Section; Safety Regarding Lubrication And Service - JUNTTAN PM 20L Operator's Manual

JUNTTAN
7.

ROUTINE SERVICE SECTION

7.1 SAFETY REGARDING LUBRICATION AND
SERVICE
When you service the machine, relieve pressure and allow time for cooling of the
hydraulic system and engine. Remove the physical forces presented by the load or
other machine parts prior to dismounting any component. Remember that the fluids
are flammable, the exhaust is toxic and the batteries contain corrosive acid.
Perform the service in an area and in a manner that no water, dirt or other type of
contamination can get into the systems of the machine. Take the necessary
precautions so that your skin does not come into contact with the fluids, and ensure
that there is no spillage to the environment.
Before placing this machine in service, the Service Manual supplied with, and
considered part of this machine, must be studied and understood by each person
responsible for operation and maintenance of the machine. Safe and efficient
operation of this machine requires that it be maintained in good condition and that its
operator be thoroughly familiar with the controls and the general capability of the
machine.
Follow the instructions for performing routine service in the appropriate sections of
this manual and accompanying manuals (engine, etc.). Familiarize yourself carefully
and completely with each item before you begin the service. If you are in doubt or
have any questions, consult the manufacturer. Do not service the machine while it is
in operation, mobile or while the engine is running, unless expressly instructed to do
so.
n DANGER
Do not place yourself under any rope suspended loads.
n ATTENTION
Incorrect or negligent service can be detrimental to the life of the machine. There
shall be always at least two persons (operator, helper) when servicing or maintaining
the machine on the working site. One of them shall supervise the safety of other
workers. The operator shall have possibility to use emergency stops in all situations.
Always use sufficiently lights in the operation area. Secure communication between
workers and operator in all situations.
Routine service section
91