Safety Aspects Regarding The Work Site; Safety Aspects During Non-Operation - JUNTTAN PM 20L Operator's Manual

JUNTTAN
Keep all materials and fluids in
properly designed
containers.
Do not keep any loose items on the
machine or in the cab. They should be
stored in appropriate compartments
or elsewhere outside the machine.
Report damages
components immediately. Repair oil
leakages without delay.
Avoid staying near the engine exhaust
when the engine is running.
n WARNING
Do not to stay within the operating
radius.
2.3 SAFETY ASPECTS
REGARDING THE
WORK SITE
The machine should only be operated
on ground which gives sufficient
support. Working or travel on slopes
should be avoided.
You should be familiar with the
dimensions of the machine and use
the mirrors to detect objects hidden
by parts of the machine.
When working near power lines or
high voltage lines find out the proper
safe working distance.
Danger zone is shown in the picture
at the end of safety section.
Do not stand on any mobile parts of
the machine during operation. Do not
stand or walk on any steel ropes,
hydraulic tubes or hoses. During
operation do not stand over a rope.
Keep a minimum distance of one
metre from pressurised tubes and
and marked hoses.
Do not go under the machine or any
part of it and preferably stay out of
the working radius during operation.
Do not let outside personnel into the
working area. Keep doors and covers
closed secured to their positions.
to machine
No adjustments should be made
during operation unless expressly
instructed to do so. Keep you hands
away from fans and any moving
parts. Do not start using the machine
if a wind exceeding 20 m/s (72 km/h,
Fresh gale). When the wind velocity
exceeds 20 m/s, fresh gale, the
machine has to be lowered to the
transport
operating temperature is -20°C – +40
°C.
Check that the emergency stops of the
engine are in working order before
start of each shift.
2.4
The
parked on level ground, leader foot
on ground, hammer against ground
and leader at a slight backward
inclination. Alternatively the machine
can be parked to the transport
position.
During storage lock the doors and
covers, remove the ignition keys and
turn the main switch off. In transport
the slewing mechanism lock must be
engaged. When you lift the machine
with slings use only the indicated
lifting points.
Safety section
position. Recommended
SAFETY ASPECTS
DURING
NON-OPERATION
machine should always be
9