Storing The Machine - JUNTTAN PM 20L Operator's Manual

JUNTTAN
6.8.4

STORING THE MACHINE

When you store the machine and leave it unattended, follow the steps listed below.
During storage the machine should be protected from moisture, dust, mechanical
damage and vandalism. Park the machine on level and solid ground, out of the way and
away from anything moving which might damage it.
For short time (over the weekend) the machine can be stored with lifted leader.
Keep tracks fully extended.
Attach the ropes to the machine or equipment.
Wind up the slack from ropes.
Engage the slewing mechanism lock.
Lock all doors and cover.
Clean the tracks from excess dirt.
Lower the leader foot on ground and the hammer/rotary head down.
Put the leader slightly backwards inclined.
For longer periods (more than weekend) the machine is stored in the transport position.
Keep tracks fully extended.
Attach the ropes to the machine or equipment.
Wind up the slack from ropes.
Engage the slewing mechanism lock.
Remove all items from the cab.
Turn off the main switch.
Lock all doors and cover.
Clean the tracks from excess dirt.
n ATTENTION
When you start to operate the machine always remember to disengage the slewing
mechanism lock and to widen the tracks fully out.
88
Daily operation section