Stopping Engine; Stability - JUNTTAN PM 20L Operator's Manual

JUNTTAN
6.2.2

STOPPING ENGINE

• Stopping engine according to engine operator's manual.
• Before stopping the engine, turn all switches to the neutral positions.
• Pull the safety lever to back position.
• Turn the ignition key to position 0 to stop the engine.
• If you leave the machine unattended for a longer period turn the mains switch off
and lock the doors.
6.3

STABILITY

See capacity tables (specifications section). If you need more information about the
capacity, contact the manufacturer Junttan Oy, and for more details about the applicable
restrictions, see the respective Sections. Operate only on level and firm ground. Use
stock mats when the ground is soft. When you are travelling on a slope adjust the
position of the leader to vertical in order to maintain balance. Do not work or travel on
ground which inclined more than 5°.
n DANGER
When working with the machine always keep the tracks at full width.
n WARNING
When moving with the machine the stability gets
worse if you narrow tracks, pull in counterweight,
incline or move leader forward.
Daily operation section
59