Daily Operation Section; General - JUNTTAN PM 20L Operator's Manual

JUNTTAN
6.

DAILY OPERATION SECTION

6.1

GENERAL

These instructions are written for operating the machine on land. Operation on floats is
not covered in this manual (always consult the manufacturer or importer before start
operating on floats).
When entering and exiting the cab use only the accesses provided with handles and
steps. You should face the machine and use both hands. Do not mount onto or dismount
from the machine while it is moving.
• Operate the machine only when you are seated in the cab.
• Adjust the seat for your height.
• Use the controls only when the engine is running.
• The cab is designed for one person only.
• Clear the machine working area of outside personnel.
• Make sure that the ground around the machine is level and firm and that there are no
ditches, soft areas, obstacles, power lines etc.
• Clean the windows if necessary and close the doors and windows or secure them in
their open positions. Adjust the mirrors to give the best view.
• Do not start the engine unless instructed to do so if you know that there is somebody
servicing the machine or there is a sign "Attention, machine being serviced" in the
cab etc.
• Note while piling rigs can handle long and heavy piles even at inclinations, their
stability is different from any other type of machine. For stability consult the
capacity tables.
• Use the machine only when it is in proper working order and has been lubricated and
serviced according to the schedules in the respective manuals.
n NOTICE
Use crane to lower the hammer or other tool from the leader if the engine is out of
order.
Daily operation section
57