JUNTTAN PM 20L Operator's Manual page 18

JUNTTAN
WARNING SIGNS
- warning signs are shown in safety section
OTHER
- safety lever to deactivate controls in the cab
- engine emergency stop
- sensor for horizontal slide in-position
- sensor for leader position on leader lift device
- sensor for leader lift device top-position
- sensor for lateral inclination cylinder in-position
WINCHES TOP LIMITS
Stops the following functions, which can lead to damage of the steel ropes:
- leader foot cylinder (pull-in function prevented)
- forward inclination cylinder (push-out function prevented)
- leader telescope cylinder (push-out function prevented)
- lateral inclination cylinders (push-out function prevented)
- horizontal slide cylinder (push-out function prevented)
If the winch top limit or cable is broken and the leader is in the vertical position, it is not
possible to lower the leader. In this case you must by-pass the top limits, switch on the
left console. See also section
18
Signal lights in the upper
By-pass switch
for the winches
top limits
Specifications section
console.