Warning Signs - JUNTTAN PM 20L Operator's Manual

JUNTTAN
2.7

WARNING SIGNS

There are several warning signs on
this machine. Please read all warning
signs. Keep signs clean and replace
them if the words cannot be read.
HOT SURFACE
STAY CLEAR OF
ROTATING PARTS
STAY CLEAR OF
STABILIZER CYLINDER
DO NOT GO UNDER
THE HAMMER OR ANY
PART OF IT AND STAY
OUT OF THE WORKING
RADIUS DURING
WARNING
WARNING
WARNING
WARNING
OPERATION.
Safety section
WARNING
KEEP CLEAR
OF PILE DRIVER
WHEN IN OPERATION
h
WARNING
MOVING
COUNTERWEIGHT
h
DANGER
IT IS STRICTLY FORBIDDEN
TO WORK OR STAND
UNDER HAMMER OR ANY
ROPE SUSPENDED LOAD
CAUTION
Pressurized vessel.
Discharge prior
to disassembly.
Use only nitrogen
GENERAL INFORMATION
Read all safety instructions
and operating instructions
before start using
servicing this machine.
Emergency exit Lifting point
or
11