Summary of Contents for Altendorf E-Cruise
- Page 3 Connector on the brake Blue White/Brown Common earth connection on the left A-pillar Black Connector on the accelerator pedal...
- Page 4 Aftermarket clutch switch Only mount this wire on vehicles with manual transmission. Ground White Yellow Purple White connector behind the radio (Viewed from wire side) White/Red (Speed)
- Page 5 Disconnect the airbag in the manner described by TOYOTA. Cut the template after the marked line, mount it on the right side of the plastic cover on the steering wheel. Use a 28mm drill. Mount the connector for the lever in place, and install the lever in the steering wheel with the two enclosed screws.
- Page 6 1. Activate and hold down the brake pedal. 2. Activate SET briefly = test LED lights up red. 3. Activate SET briefly again = test LED lights up orange. E-Cruise is set for automat gear. The test LED will flash in all 3 colors, p rovided that If this function is activated by mistake.