BENCH INSTRUCTIONS PLASTIC BOARDS BENCH END ABC-P0097 ABC-PPL1000 #10 X 2.5" SCREWS REQUIRED TOOLS NOTE: IT IS IMPORTANT TO KEEP ALL SCREWS LOOSE (NOT INCLUDED) DURING ASSEMBLY UNTIL ENTIRE BENCH IS ASSEMBLED - POWER DRILL - #2 SQUARE DRIVE HARDWARE & TOOLS REQUIRED FOR ASSEMBLY...
STEP 2 Seat Assembly BENCH INSTRUCTIONS • Move the remaining bench end (A) to the center of the bench • Align the predrilled holes in the bench end with holes in the plastic board (B) STEP 1 Seat Assembly • Secure each plastic board to the end with •...
BENCH INSTRUCTIONS STEP 3 Backrest Assembly • Hold a plastic board (B) up to the back rest portion of the bench end (A) • Align the predrilled holes in the bench end (A) with holes in the plastic board (B) •...
Page 5
BENCH SPECIFICATIONS REV# 4 9/10/21 KBC1115 KBC1120 KBC1125 KBC1151 KBC1152 KBC1153 KBC1155 KBC1156 KBC1157 KBC1161 KBC1162 KBC1163 48.00 4FT BENCH 60.00 5FT BENCH 72.00 6FT BENCH 2.63 25.36 FRONT SIDE CONSTRUCTION MATERIALS: Recycled Plastic HARDWARE: ALL DIMENSIONS SHOWN IN INCHES...
This manual is also suitable for:
Kbc1120Kbc1125Kbc1151Kbc1152Kbc1153Kbc1155...
Show all