Page 2
Installation of Wireless RF Wall Panel Transmitter 1.Open the back cover of the transmitter, put the two batteries (CR2032) into the battery compartment and cover the back cover. See figures below: F ig ure1: Open the b ac k c over of the transmitter.
Page 3
2.Two ways to fix the transmitter: a.Use double-sided adhesive tape and secure in the desired posi- tion. b.Fix on the wire box with screws. Ways to Install the Transmitter Fix with double-sided Fix with screws adhesive type The distance between the two mounting holes is 60mm 60MM Clean the wall surface from dust and...
The LED indicator will turn red, and then it will turn blue. When in blue release IMMEDIATELY. Paring successfully erased. Note: You don't have to do anything to erase the paring on the Omnia Wireless RF Panel (OSYT-C01,2,3) Troubleshooting: 1.Switch buttons always on:...
Page 5
Wireless RF Wall Panel OSYT-C01,2,3 User Manual w w w . s m a r t o m n i a . c o m smart.omnia smartomniacr...