Download Print this page
Dancing Wings Hobby 1.8M 1:5 Savage Bobber Instruction Manual

Dancing Wings Hobby 1.8M 1:5 Savage Bobber Instruction Manual

Balsawood scale airplane

Advertisement

Quick Links

飞行前的建议
PRE-FLIGHT CHECKS
● 安装舵机前,请先将舵机通电让舵机中心点回中,以便能更好的调试舵面。
● Check/adjust servo centering, in order to adjust the control surface better.
● 初次启动电机,您需要确认电机旋转的方向以适配您的机型。
● Double-check the spinning direction of motor at first usage, and sure it's suitable for your model.
● 请将重心(CG)调整至说明书所述位置并尽量靠近。如果有需要,您可以增加机头或者机尾的重量,以确保机体有更好的飞行姿态。
● Set the center of gravity (CG) at the position that manual already marked out. If necessary, add weight to the nose or tail
to ensure the best flight performance.
● 检查机身内部,确保所有设备正常连接;检查机身表面,包括但是不限于蒙皮,固定螺丝,舱盖,座舱罩等位置。
● Double-check the inside of the fuselage, make sure all the equipments are correctly connected; Check the heat-shrink
covering material's surface, Make certain all screws, bolts, cabin and canopy remain secure.
● 在飞行前,请检查您电池情况,若有低电压,电池损坏等情况,请您停止操作并马上更换电池。
● Take great care when connecting/disconnecting the battery, pls replace the battery immediately once found low voltage
or damage to battery.
● 机身内部设备连接的方式,会和您的收发设备有关,在一些功能更多的收发设备上,您可以通过设置简化机身内部设备的连接。详细
请查看您的收发设备以确认是否满足您需要的功能。
● The way the internal devices of the fuselage are connected will be related to your transmitter-receiver device. For those
transmitter-receiver devices with more functions, you can simplify the connection of the internal devices of the fuselage.
Check your device for details to see if it meets the features you need.
● 动力设备和收发设备第一次配对时,可能需要设置油门最大行程,请您自行设置。
● When the power system and transmitter-receiver device are paired for the first time, you may need to set the maximum
stroke of the throttle. Please set it yourself.
注意事项
SAFETY PRECAUTIONS
这个产品不是玩具,而是一个复杂的具有难度的飞行器。您和您身边人的安全取决于您如何操作它,您需要了解相关知识,并谨慎操作。禁止
没有成人陪伴的儿童独自操作该设备。不适合14岁以下人群使用。再次强调,这不是一个玩具。
This product should not be considered a toy, but rather a complicated and sophisticated flying model. Your safety depends
on how you use and fly it, If not correctly operated, could cause injury to you or your family members. Children must be
accompanied by an adult at all times if operating this product. Not suitable for children under the age of 14. THIS IS NOT A
TOY.
● 不要在机场,军事基地,居民区或其他任何受限制的地方飞行。
● Do not fly around some restricted location like airports, military bases, residential areas, etc.
● 您需要对发射机进行距离检查,以确保没有收到任何干扰。
● You will need to range check the transmitter to be sure you are not experiencing any interference.
● 始终保持先打开发射机后打开接收机,先关闭接收机后关闭发射机的步骤。
● Always turn on the receiver last after turning on the transmitter and shut off the receiver first before turning off the transmitter.
● 如果您是初学者,建议您在有经验玩家的协助下调试和飞行。
● If you are only a beginner to the radio control model flying, do not attempt to fly your model without any assistance or advice from
advanced expert fliers.
● 请将相关物品放置在孩子们够不到的地方
● Keep relevant items out of reach of children.
● 这个设备的设计已经超过我们正常使用所需要刚性要求,但若您需要以超出我们推荐的动力飞行时,请合理控制动作幅度并适当增加机体强度。
● This product has been flight tested to meet or exceed our rigid performance and reliability standards in normal use,if you plan to perform
any high-stress flying, you are solely responsible for taking any and all necessary steps to control movement range and reinforce the body
strength.
● 您的设备中可能包括一些玻纤和碳纤雕刻的部件,这些纤维部件所带的粉尘可能会引起眼睛,皮肤的不适,请您在需要的时候带上护目镜或者防尘服。
● This product may include some fiberglass and carbon-fiber reinforced plastic parts,which may cause eye and skin discomfort,pls wear the
goggles or dust-proof clothes when needed.
● 因航空运输安全管制,您收到的产品可能没有清单中出现过的胶水,请您理解无法发送胶水给您的原因。您可以在当地文具店很方便的购买到您所需要
的胶水。
● Due to air traffic safety control, the products you receive may not have the glue that appears in the list. Please understand and purchase the
glue you need at your local stationery store.
http://www.dwhobby.com/
Balsawood Scale Airplane
飞行参数
推荐配置
Suggested Equipment
Specification
翼展:1.88M(74")
马达:EP:MC3520 880KV
机长:1.30M(51")
GP:2C 17cc or 50-55 Class
桨叶:14*7inch
起飞重量: ≈3.8kg
电调:80A(4S)
Wingspan:1.88M(74")
电池:4S 5000mAh+
Fuselage Length:1.30M(51")
舵机:37g EP:6pcs GP:7pcs
Flying Weight:≈3.8kg
通道:6CH
Motor : EP:MC3520 880KV
GP:2C 17cc or 50-55 Class
Prop : 14*7inch
ESC:80A(4S)
Battery:4S 5000mAh+
Servo : 37g EP:6pcs GP:7pcs
Radio:6CH
SCG33
ARF
工具
Tools Needed

Advertisement

loading

Summary of Contents for Dancing Wings Hobby 1.8M 1:5 Savage Bobber

  • Page 1 Balsawood Scale Airplane SCG33 飞行前的建议 PRE-FLIGHT CHECKS ● 安装舵机前,请先将舵机通电让舵机中心点回中,以便能更好的调试舵面。 ● Check/adjust servo centering, in order to adjust the control surface better. ● 初次启动电机,您需要确认电机旋转的方向以适配您的机型。 ● Double-check the spinning direction of motor at first usage, and sure it’s suitable for your model. ●...
  • Page 2 起落架安装 配件图仅做参考用,您收到的实物可能因为修改/优化的原因导致与图片有略有不同。 Assemble the Landing Gear Photos shown here just for reference, the product you received maybe slightly differ from the photos due to continuous improvement on products. 01-1 01-2 SCG33-A SCG33-E SCG33-A SCG33-D SCG33-B SCG33-F 螺丝 screw M3x15mm SCG33-E.1 SCG33-E SCG33-C SCG33-G...
  • Page 3 机翼安装 Install the Wing 02-5 SCG33-B 副翼 Aileron 03-1 Epoxy glue 润滑油 SCG33-F Lubricant oil 在针式铰链结合处打润滑油(防止胶水焊死)。 使用环氧树脂胶安装和固定针式铰链前,请先确认舵面可以自由摆动。 Add some lubricating oil in the joint of needle type hinge.(Avoid the glue stuck dead.) Before install and fasten the needle type hinge with epoxide-resin 调整到轮子与舵面平行...
  • Page 4 安装机翼斜撑 细节1 03-6 螺丝 03-11 从机翼上取下舵机仓盖板, 粘贴辅助 Detail 1 Install the wing strut Screw 木块, 把舵机安装到木块之间。 SCG33-G.1 M3*10mm Remove the servo compartment cover from the wing, and install the servos between SCG33-G.2 the small wooden blocks. SCG33-G 03-7 舵机线导出孔 细节2 细节3 螺丝M3*15mm+自锁螺母...
  • Page 5 1.在舵机上安装舵臂,舵臂上安装快装接头。 螺丝M3*20mm+自锁螺母 Install the servo arm on the servo, and install the EZ-connector on the servo arm 03-15 Screw +Self-locking nut 2.连杆夹头一端夹住舵角,另一端穿入舵臂上的快装接头,调整到合适位置后,锁紧快装接头上的螺丝 One end of the connecting rod collet clamps the rudder horn, and the other end is inserted into the EZ-connector on the rudder arm.
  • Page 6 机翼拉线及像真件安装示范 Display the stay wire and scale parts 按长度裁剪尼龙拉线,穿入拉 环,打结固定。 SCG33-H Cut the nylon stay wire according to the length, thread it through the loop, and tie a knot to secure it. Epoxy glue 设置和调试 Set and Adjust 水平尾翼正面 在图示预留孔位置,安装拉 重心位置展示...
  • Page 7 地面控制方向测试 通常情况下,舵面角度的设置如下: Usually, the control throws set as below: Control Directions Tests 遥控器动作 飞机反应 副翼 ≈110mm Aileron 升 升降杆下拉 降 Lifting rod down 20°-35° 舵 20°-35° 升降杆上推 Lifting rod up 25° 25° 25° 25° 转向杆向右 副 Steering rod to the right 翼...
  • Page 8 NOTE:...

This manual is also suitable for:

Scg33