Safety Precaution Disconnect from the main power supply before servicing the unit. DO NOT pull out the power cord when the power is ON. This may cause serious electrical shocks which may result in fire hazards. 1. Safety Precaution ................. 1 - 2 2.
Page 3
Step 1 - Fix the Rubber Pulley Assembly to the Downrod with Bolt, Washer, Nut and tighten them firmly, then insert the Clevis Pin. Canopy LED Light Kit Motor Assembly with Downrod Blade x 5 and Coupling Cover Step 2 - Remove the Bolt, Clevis, Nut, Washer and Rubber Pulley from the Downrod. Place the Rubber Pulley onto the ceiling hook and fix back the Bolt, Clevis, Nut and Washer.
Page 4
Step 5 - Install the Blades on Motor with Screw. Connect the connectors and install Step 3 - Tie the Safety Wire across the hook as shown and firmly screw the Safety Wire the LED light kit by twisting in. onto the Downrod.
Page 5
Motor Orange Blue MAIN PCB Neutral (Blue) Blue Orange N LED+ Live (Brown) Brown Blue LED- Earth (Green/Yellow) Green/Yellow Power Supply 220V-240V - 50Hz...
Page 6
Transmitter Learning Process Transmitter Function - Light on/off & select LED colour - Turn off fan Mount the remote control 1 - 6 - Fan speed lowest to highest holder on the wall with the - Natural wind, creating gentle sea- screws provided.
Page 7
More than 1m Luna-5B/40 LED: 970mm (3’ 4”) Luna-5B/46 LED: 1180mm (3’ 10”) Luna-5B/56 LED: 1400mm (4’ 8”) Model Luna-5B/40 LED Luna-5B/46 LED Luna-5B/56 LED No. of Blades Fan Width 40” 46” 56” Motor R.P.M 120 - 275 90 - 250...