Stealth BBUX6 Series Quick Start Manual

Operational description:
To comply with FCC NPS (Network Protection Standard) requirements: NPS and other compliance/
safeguard features for AGC and anti-oscillation have been implemented. NPS and other compliance/
safeguard features are defaulted to be "On" (in operation). NPS and other compliance/safeguard features
can not be eld recon gured, disabled or removed. This booster is not user programmable, does not need
ne tuning or adjustment, does not require professional installation. Most wireless providers consent to
the use of signal boosters. Some providers may not consent to the use of this device on their network.
If you are unsure, contact your provider.
The antenna for the device has a 10 meter above ground maximum antenna height limitation when the
device is used with a handset that covers the 1710-1755 MHz band. Violation of this rule could be subject
to potential FCC enforcement action for noncompliance.
This device may be operated ONLY in a xed location for in-building use.
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and
have your provider's consent.
Contact information for Booster registration:
Some providers have set up web-sites for booster registration. If you don't see
your provider on this list, please contact your provider for information on how
to register your booster.
AT&T: https://securec45.securewebsession.com/attsignalbooster.com/
Verizon: http://www.verizonwireless.com/solutions-and-services/accessories/
register-signal-booster/
T-mobile: https://www.signalboosterregistration.com/
Sprint: https://www.sprint.com/legal/fcc_boosters.html
Us Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp
WARNING. E911 location information may not be provided or may be inaccurate
for calls served by using this device.
Made in
North
FCC
Approved
America
1-877-726-3444
1) Installation:
Connect the inside antenna and the outside antenna as shown in Fig. 1, Pg. 4.
2) Outside antenna:
a) Place outside antenna outside of the house in the area that has the best signal.
b) If outside location is unavailable, place the outdoor antenna on a window with
the best signal.
3) Inside Antenna: Connect the inside antenna as shown in Fig. 1, Pg. 4.
4) Separation: Increase the distance of the outside and inside antenna as much as
possible to maximize coverage and avoid gain reduction.
of at least 20 feet or a horizontal distance of at least 50 feet between the Outside
Antenna to the Inside Antenna should be maintained.
5) Power: Connect the power supply to the booster and turn it on.
6) Coverage: Use your cell phone to determine if coverage is OK. If coverage is not
adequate, please look at the Green and Orange lights to determine if the
booster has automatically turned down its gain per LED Gain Chart on Pg. 6.
If so pls try to separate or move antennas as per explantion on Pg. 5/6.
Important: Use only the power supply included with the booster. Connecting any other power supply at any
time will result in damage to the booster and will void the warranty. Do not turn on the power switch until
ALL cables have been screwed or plugged into the booster or you can cause damage to the booster.
Optional Dual Inside Antenna Installation (Fig. 2)
(Additional parts required which are not included in Booster kit
See page 2 for list of approved equipment )
1) Choose a splitter model for your needs. For 2 interior antennas use a 2 way
splitter and for 3 interior antennas use a 3 way splitter etc...
2) Mount the interior antennas in the areas which need cellular coverage
3) Evenly distribute the antennas throughout the oors and areas to cover
4) Turn on Booster unit and check signal strength improvement as needed
If you need help pls contact techsupport@smoothtalker.com and we will help
you determine your cell tower location and get you setup.
techsupport@smoothtalker.com
3
stealth
Automatic power
control protects the
tech
®
Cellular Network
Smoothtalker.com
A vertical distance
Tel: 1 877 726 3444
Stealth X6 4G LTE
Extreme Power Building Boosters
X660 X665 X672
User Manual
Cellular
60-72dB 6 BAND
RX/TX
Signal Booster
MULTI BAND 60-72dB
Extreme Power Building Booster
2G, 3G, 3G+, 4G, 4G+
GSM,HSPA,CDMA,LTE, LTE A
Band 12,17 700MHz Lower
Band 13 700MHz Upper
Band 5 850MHz
Band 4 1700/2100MHz
Band 2,25 1900MHz ext
In 2001 SmoothTalker produced the rst digital mobile cellular signal booster
in North America with FCC and ICAN approval. We continue to lead with the
most powerful and intelligent boosters in the world.
Our dynamic adaptive proprietary algorithms make them very network friendly.
We call it STEALTH TECH technology.
1-877-726-3444
Typical Installation (Fig. 1 )
(All parts are included in Booster kit.)
Fig. 1
Optional Dual Inside Antenna Installation (Fig. 2 )
(Additional parts required which are not included in Booster kit.)
Fig. 2
6 BAND
MULTI BAND
Building
60 -72dB
BBUX6 Series
USA
model shown: BBUX660
stealth
tech
®
Smoothtalker.com
4