Page 1
BRIDGE101A Bridge/Strain Gauge Data Logger PRODUCT TABLE OF CONTENTS USER GUIDE 2Product Overview 2Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 2Device Operation 3Device Maintenance 4Need Help?
Page 2
Available in three different measurement ranges (±32 mV, highlight the desired data logger. ±160 mV or ±1200 mV), the Bridge101A offers a reading 4. For most applications, select Custom Start from rate of up to 4 Hz with memory capacity of over 2,000,000 the menu bar and choose the desired start method, readings (memory wrap optional).
Page 3
Bridge101A PRODUCT USER GUIDE Device Operation (cont’d) Multiple Start/Stop Mode Activation • To start device: Press and hold the pushbutton for 5 Alarm Settings seconds, the green LED will flash during this time. The To change the settings for the alarm: device has started logging.
Page 4
Bridge101A NPREOED UHCETL PU?SER GUIDE Product Support & Troubleshooting: • Visit our Resources online at madgetech.com/resources. • Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support: • Refer to the built-in help section of the MadgeTech 4 Software.