Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nabis Ossia & Corda A05022
Summary of Contents for Nabis Ossia & Corda A05022
- Page 1 Ossia & Corda tap range Instruction & Warranty Leaflet Product code: A05022 A05023 A05024 A05025 A05026 A05027 Tap head shown is for illustration purposes only. Please keep this instructions for future reference and request of replacement parts.
-
Page 2: Pipe Connections
Water Regulations Requirements It is important to ensure that the water supplies to your taps and mixers are connected in accordance with the water regulations (WRAS) requirements and good plumbing practice. It is Wolseley’s recommendation and good plumbing practice that the supplies of hot and cold water to the products should be equal (balanced) pressures in order to provide a consistent flow. -
Page 3: Installation Requirements
Installation Requirements Flexible Connecting Pipes Please ensure flexible pipes are connected to the household pipework with extra care to avoid the flexi pipes are not kinked, twist or bent sharply. Below are recommended ways to fit the flexible pipes during tap installation. Failure to follow the below recommended guidelines may damage the flexible pipes or poor taps performance. - Page 4 Mono basin mixer Tap body Flange Anti-rotational washer Cold Fixing rod C shaped rubber washer C shaped metal washer Fixing Nut Flexible tails Fig 1 1. Identify all components and check for completeness, particularly before commencing installation. 2. Screw fixing rods to tap body and tighten it. 3.
- Page 5 Bath Shower Mixer Handset Tap body Flange Wall bracket Anti-rotational washer Shower hose Backnut washer Backnut Holder Fixing bracket Fig 1 Fig 2 1. Identify all components and check for completeness, particularly before commencing installation. 2. Remove the backnuts and backnut washers from tap body.. 3.
- Page 6 Bath Filler Tap body Flange Anti-rotational washer Backnut washer Backnut 1. Identify all components and check for completeness, particularly before commencing installation. 2. Remove the backnuts and backnut washers from tap body. 3. Ensuring that the anti-rotational washer is fitted to flange, then fit flange to tap body. 4.
-
Page 7: Component Diagram
Component Diagram... -
Page 8: Care And Maintenance
Nabis products are manufactured to the highest of standards and should require little or no maintenance. In the unlikely event of any spare part requirements, please contact our free phone helpline number.