Advertisement
Quick Links
Instructions for Operation
Thank you for purchasing the controller for
warm white lights from EasyPro.
These controllers will power up to 2, 4 or 6
2 pin LED lights depending
Controller Features and Includes
•
Weatherproof with mounting holes
•
Built in digital timer
•
Built in voltage regulator for adequate voltage for lights up to 300' away
•
115 volt input with 12v AC output
•
Pigtail with 2 pin receptacle and quick connect end.
Safety and Electrical Connections
1.
Always disconnect the electrical supply before handling, maintaining,
repairing or installing any pond equipment.
2. Do not open the controller. There are no serviceable parts inside the
controller.
3. Connect the 110 volt plug of the controller/transformer to a 110 volt
receptacle that is protected by a Ground Fault Circuit Interrupter.
4. Do not modify wiring in any way, quick plug ends must stay intact to
function and should not be replaced with any other connections.
5. Do not use with swimming pools or spas.
6. Only connect to matching 2 pin cords, splitters and lighting fixtures.
7. All electrical work must be performed by a qualified technician. Always follow
the National Electrical Code (NEC) or the Canadian Electrical Code as well as
all local, state and provincial codes. Failure to follow manufacturer's installation
instructions may result in electrical shock, fire hazard, personal injury or
death, damaged equipment, provide unsatisfactory performance and will void
manufacturer's warranty.
WLC2 • WLC4 • WLC6
Controller
with Digital Timer
Safety • Warranty
on the model.
Advertisement
Related Manuals for EasyPro WLC2
Summary of Contents for EasyPro WLC2
- Page 1 WLC2 • WLC4 • WLC6 Controller with Digital Timer Instructions for Operation Safety • Warranty Thank you for purchasing the controller for warm white lights from EasyPro. These controllers will power up to 2, 4 or 6 2 pin LED lights depending on the model.
- Page 2 Setting the Timer Mount the weatherproof controller box in a secure location near a power supply and plug into 110 volt outlet. The controller is weatherproof and does not need to be protected from the weather. Example Program Functions PROGRAM Example Manual Functions AUTO Programmable Timer Features • D igital electronic time switch with daily programs • R epeat programs with 16 on/off settings and manual override •...
- Page 3 Operation Instructions for Manual Function 1. B e sure the controller is plugged into 110 volt GFCI protected outlet. 2. R emove clear plastic cover from timer. Keep cover safe and replace when finished. 3. U nlock the timer by pressing the “C/R” button four times. This removes the “a” character in lower left corner of the display screen. 4. P ress “Manual” button to select desired function. The ON function will tell controller to send power to lights and OFF function will stop power from being supplied to lights. 5. W hen pressing the “Manual” button it will scroll through settings in this order: ON, AUTO, OFF, AUTO.
- Page 4 EasyPro Pond Products Limited Warranty EasyPro Pond Products (“EasyPro”) warrants to the purchaser that this product ("Product") will be free from any mechanical or material defects for a period of one year from the date of purchase. Removal of Quick Connect ends will void warranty. Do not open the controller. There are no serviceable parts inside the controller and opening the controller will void warranty. This warranty only covers properly installed and maintained Products sold by authorized EasyPro Sellers who are subject to and follow EasyPro’s quality control standards. Please note that because EasyPro is unable to control the quality of Products sold by unauthorized sellers, unless otherwise prohibited by law, this warranty does not cover Products purchased from unauthorized sellers. This warranty does not cover normal wear and tear, nor any deterioration suffered through overloading, improper use, negligence, improper installation, acts of God or accident. Similarly, any modification made by the purchaser...