The Guitammer Company or an authorized service center. The Guitammer Company shall be the Þ nal authority in the determination of all warranty service claims. Please contact us before returning any defective products to the store where they were purchased.
Page 1 Product Description The ButtKicker LFE is a patented 4 ohm low frequency audio ® transducer that features a 3 lb. (1.48 kg) magnetically suspended piston. The ButtKicker is musically accurate, has powerful low frequency response, and is virtually indestructible and maintenance free.
Page 9 needed under the riser. As always, keep in mind any maintenance that may become necessary. Think “suspension.” In essence, you’re constructing a ß oor above the room’s floor. Build the riser similar to a suspended wood joist ß oor to give the riser its greatest low frequency response.
Page 3 Integration into Your Sound System Power The ButtKicker is a passive load and therefore requires ® its own dedicated audio power ampliÞ er. Suggested minimum required power is 400 watts. The use of 14 gauge speaker cable between the ampliÞ er and the ButtKicker is recommended.
Page 7 What does shake, cont. Example one A room with a suspended, joist ß oor measuring 12’ by 14’. The ß oor is only supported around the edges (at the walls) by a foundation, and is capable of bending and vibrating in the area between its supported hard points.
Page 5 No Separate “Subwoofer Output” If no “Subwoofer Output” exists on your processor / receiver/ preamp please visit our website, www.thebuttkicker.com, or contact our technical support department. Physical Mounting and Placement Some consideration regarding the human sense of feeling: Your brain is constantly making perceptions of your surroundings- indoors or outdoors, size, shape and material of a room, etc.