NOMA CONSTANT-LIT LIGHT SHOW 2.0 Instruction Manual

/VIOMA \ \ \
A D V A N C E D
CONSTANT-LIT LIGHT SHOW 2.0
Colour-Changing C9 LEDs
model no. 251-0060-8 | contact us 1-866-827-4985
SAVE THESE INSTRUCTIONS!
This manual contains important safety and operating instructions for power units.
WARNING:
ELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years
of age. As with all electrical products, precautions should be observed during handling and use
to reduce the risk of electric shock. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Strobe lights have been known to trigger seizures in people with photosensitive epilepsy.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before use.
WHEN USING ELECTRICAL PRODUCTS, BASIC
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
INCLUDING THE FOLLOWING:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
1. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications, connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
2. This seasonal-use product is not intended for permanent installation or use.
3. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
4. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
5. Do not let LEDs rest on the supply cord or on any wire.
6. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
7. This is an electric product—not a toy! To avoid risk of fire, burns, personal injury and electric shock, it
should not be played with or placed where small children can reach it.
8. Do not use this product for other than its intended use.
9. Do not hang ornaments or other objects from cord, wire, or light string.
10. Do not place lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while the
power is on.
11. Do not perform any maintenance or troubleshoot for bad or broken LEDs while the power is on.
12. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
13. Do not cover the product with cloth, paper or any material not part of the product when in use.
14. This product is equipped with non-shunted type LEDs. Do not twist LEDs after the reflector is removed.
15. Read and follow all instructions that are on the product or provided with the product.
16. Caution—To reduce the risk of fire and electric shock: a) do not install on trees having needles, leaves or
i
branch coverings of metal or materials which look like metal; and b) do not mount or support strings in a
manner that can cut or damage wire insulation.
JTWW™
Instruction Manual
For indoor and outdoor use
Retain carton for storage purposes
__
1