SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ●...
Page 3
ASSEMBLY INSTRUCTIONS (continued) 3. Install a bulb (not included). 4. Unscrew the two set screws Max.60W Type A Bulb (not included) See relamping label at socket from the cover (G). Attach the area or packaging for cover (G) to the fixture (B) by maximum wattage allowed.
FUNCTION AND OPERATION Choose a mode by sliding the slide switch. The light will turn on immediately when power is applied. Wait for 30 seconds to allow the sensor to warm up. 1. Test MODE (daytime and nighttime operation.) • The light will turn to low-level brightness (0~50%).The light will turn to high-level brightness (full brightness) when motion is detected, and stay on as long as the motion continues.
NOTE: Where you install your lantern is important: 1. The sensitivity of the motion sensor will increase as the Be sure the light is mounted straight on the wall; environmental temperature gets colder. For best performance, otherwise, the detection distance may be limited. gently clean the lens with a soft cloth every 1 or 2 months to ensure maximum sensitivity.
Page 6
If unable to fix any of the above issues, please consult a certified electrician. FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this lighting fixture with the original sales receipt back to your nearest MENARDS retail store.