Advertisement
Quick Links
Eden Bed – Full Size
USA Item #'s: U008-1, U008-2, U008-3
Australia Item #'s: 1532-1, 1532-2, 1532-3
Made in Vietnam for:
Incy Interiors Pty Ltd
2a Piper Street, Bathurst, NSW, 2795
AUSTRALIA
1300 94 20 50
www.incyinteriors.com.au
*Shown with mattress (sold separately)
Designed and Distributed in Australia by:
Incy Interiors Pty Ltd
2a Piper Street, Bathurst, NSW, 2795
AUSTRALIA
1300 94 20 50
www.incyinteriors.com.au
1
Advertisement
Related Manuals for Incy Interiors Eden U008-1
Summary of Contents for Incy Interiors Eden U008-1
- Page 1 Australia Item #’s: 1532-1, 1532-2, 1532-3 *Shown with mattress (sold separately) Made in Vietnam for: Designed and Distributed in Australia by: Incy Interiors Pty Ltd Incy Interiors Pty Ltd 2a Piper Street, Bathurst, NSW, 2795 2a Piper Street, Bathurst, NSW, 2795...
-
Page 2: Care And Maintenance
IMPORTANT SAFETY INFORMATION FOR TODDLER & DAY BEDS WARNING: ENTRAPMENT / STRANGULATION HAZARD Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle a child. -
Page 3: Check List
Regularly check that all assembly fittings are always tightened properly and retighten as necessary. After Sales Customer Service When you receive your Incy Interiors product, if you need any assistance or if you have any comments with respect to any aspect of the goods, please contact your local distributor via email. -
Page 4: Parts List
Parts list Assembly Instructions Tools Necessary: Allen Key (included), spanner (included) NOTE: It may be easier to assemble product with two people. NOTE: When inserting bolts, turn clockwise until tight. Then loosen off a turn. After bed is completely assembled, return to each bolt and tighten. 1. - Page 5 3. Attach the across bars (part d) to the siderails (part c) using the large bolts (part 2) and the hex nut (part 3) with the large allen key (part 5) and spanner (part 6) provided 4. Insert the wooden slats (part e) into the plastic holders (part f) – one one each end of each slat. Gently tap the plastic holders into the holes drilled on the siderails with the slats arching upwards as shown.