Download Print this page

GATEMASTER DGLWL Quick Start Manual

Surface fixed digital gate lock

Advertisement

Quick Links

SURFACE FIXED DIGITAL
GATE LOCK
A marine grade Digital Gatelock with many unique features.
Auto-latching – close the gate and the latchbolt latches into
the gate frame. To open the gate - enter the code and turn
the handle.
No power needed – High quality digital keypads ensure long
lasting durability.
Latchbolt is adjustable in length for precise fitting on site.
PRODUCT DETAILS
Product code:
Description:
DGLWL
Left handed, double sided (keypad on both entry and exit side)
DGLWR
Right handed, double sided (keypad on both entry and exit side)
DGLSWL
Left handed, single sided (keypad one side, handle other side)
DGLSWR
Right handed, single sided (keypad one side, handle other side)
Latchbolt:
Adjustable, moves 22mm (7/8"). Auto-latching when gate closes.
Keep included.
No power needed.
INSTALLATION
1.
Position angle bracket on edge of the gate (can overhang edge of gate by up
to 15mm (9/16") if required to accommodate a gap between the gate and gate
post) and mark 3 holes for the outside keypad fixing screws and spindle. Remove
angle bracket and drill 3 holes 9.0mm (3/8") diameter through the gate.
2.
Cut the 2 x M5 screws and the spindle to length to suit the gate thickness. M5
screws should be cut to gate thickness less 16mm (5/8"). The spindle should be
cut to gate thickness plus 68mm (2-5/8") for double sided and plus 82mm (3-
1/4") for single sided.
3.
Fit the outside keypad and angle bracket using M5 screws and insert spindle
(Ensure spindle is not binding on the gate).
4.
Fix angle bracket securely using screws through the remaining 2 countersunk
holes.
5.
Position lock on to the spindle and fix to the angle bracket using 2 x M8
countersunk screws.
6.
Test the lock to check it operates freely.
7.
Fix the strike plate to the gate post.
8.
ADJUSTMENT
To adjust latchbolt length insert 3mm (1/8") long arm hex key
(supplied) into end of bolt and release locking screw. Rotate bolt as required and
re-tighten locking screw. Lubricate with light oil periodically.
VISIT GATEMASTERLOCKS.COM FOR MORE
INFORMATION
© Copyright Gatemaster 2022
www.gatemasterlocks.com
SPECIFICATION
SHEET
DGLW
RIGHT HAND
LOCK SHOWN
Installation video
+44 (0)1243 558 580

Advertisement

loading

Summary of Contents for GATEMASTER DGLWL

  • Page 1 To adjust latchbolt length insert 3mm (1/8") long arm hex key (supplied) into end of bolt and release locking screw. Rotate bolt as required and Installation video re-tighten locking screw. Lubricate with light oil periodically. VISIT GATEMASTERLOCKS.COM FOR MORE INFORMATION © Copyright Gatemaster 2022 +44 (0)1243 558 580 www.gatemasterlocks.com...
  • Page 2 Spray all the fixing accessories and the latch with WD40 or equivalent. Push each of the buttons and rotate the knob several times to make sure the lock is working smoothly VISIT GATEMASTERLOCKS.COM FOR MORE INFORMATION © Copyright Gatemaster 2022 +44 (0)1243 558 580 www.gatemasterlocks.com...

This manual is also suitable for:

DglwrDglswlDglswr