GENERAL INFORMATION To ensure safe and reliable operation, please carefully read this service and installation manual in its entirety before installing and/or using this product. Reasonable care and safe methods in according with sound plumbing practices should be strictly adhered to. Before installation, refer to and understand all relevant local plumbing and electrical codes.
SAFETY INFORMATION Please review and follow the safety information listed below. WARNING • Risk of electric shock. Always disconnect power before servicing. • Do not make any electrical connections while standing on a wet surface or with wet hands. • Electrical connections and wiring for a pump installation should only be made by qualified personnel.
INSTALLATION Wrap the hose clamp around the discharge pipe. Use a screwdriver to tighten and secure the hose clamp. Feed the tether cord through the cord bracket. Determine the appropriate tether length. The tether length may vary depending on the product or application specifications. Using a screwdriver, tighten the cord bracket with the screw located on the top of the bracket.
SPECIFICATIONS Amp Rating Input Voltage 120VAC Output Voltage 120VAC Circuit Normally Open Minimum Tether Length 3-1/2" Maximum Tether Length 22" Minimum Float Range 8" Maximum Float Range 36" - 5 -...
TERMS AND CONDITIONS OF SALE Orders for this product are expressly made conditional on buyer’s assent to company’s terms and conditions of sale, which can be found at https://ipscorp.com/pdf/ipsdp-tc.pdf, or are available upon request by mail. Any terms and conditions in any of buyer’s documents that are inconsistent with or add to seller’s terms and conditions of sale are hereby rejected and are not binding upon company.