Yamatake CY8000C Specifications & Instructions

Insert Type CO
General
The CY8000C insert type CO
detects the concentration of carbon dioxide (CO
and other test sites. The CY8000C can be used in a
wide range of applications such as monitoring of CO
concentration in retain ducts and the control of outdoor air
intake.
Features
1) Non-dispersive infrared absorption method (NDIR)
2) Linear output signal in 1 to 5 VDC range
3) Stability over prolonged use
Model
Model No.
CY8000C1000 Insert Type CO
Transmitter
Specifications
Item
Sensing range CO Concentration 0 to 2000 ppm
2
Sensing element Non-dispersive infrared absorption
method (NDIR)
Sensing accuracy ± (50 ppm + 5 % of readout)
Time constant 2 min or less (non-wind state)
10 s or less (when air velocity is 2 m/s)
Operating CO Concentration: 0 to 2000 ppm
2
environmental Temperature: 0 to 50 °C
conditions Humidity: 0 to 95 % RH
(no condensation)
Transport/storage Temperature: 0 to 50 °C
conditions Humidity: 0 to 95 % RH
(moisture-proof, packed)
Power supply 24 VAC ± 10 % (50 to 60 Hz)
voltage
Power 0.4 VA
consumption
Output signal 1 to 5 VDC (CO
ppm linear)
Allowable load 500 Ω or more
resistance
Wiring Power supply 2P, CO
output 2P
Initial stabilizing Within 1 m
time
Allowable vibration 4.9 m/s² (10 to 150 Hz)
Insulating 100 M or more at 500 VDC
resistance (across bobbin and leads)
Concentration Transmitter
2
CY8000C
concentration transmitter
2
) in ducts
2
2
Description
Concentration
2
Specifications
concentration 0 to 2000
2
concentration
2
Item
Insulation Leakage current of 1 mA or less for
withstand voltage 1 minute at 500 VAC
(across bobbin and leads)
Weight Approx. 540 g
Finish Bobbin: Aluminum
Case: Polycarbonate
Cover: Polystyrene
Mounting Duct, chamber
1
AB-5798
Specifications/Instructions
Specifications