Page 1
NHD110DRMicro Series Quick Installation Guide QUICK INSTALLATION GUIDE NHD110DRMicro-SST/R NHD110DRMicro-SMT/R HD-SDI Series Microtype 1-CH HD-SDI With 1-CH Reverse Data Transmitter/Receiver (1) Safety Instructions Please be familiar with all information in this quick installation guide and product manual prior to installation and operation.
Page 2
NHD110DRMicro Series Quick Installation Guide (2) Installation 2.1 General All OT Systems products are thoroughly inspected, tested and securely packaged before delivery to ensure a stable, intact and trouble-free service. Please check the equipment upon receipt for any visible damage which may have been caused during shipping. The NHD110DRMicro units can be either horizontally or vertically wall-mounted, or mounted on any fixture, etc.
Page 3
NHD110DRMicro Series Quick Installation Guide (3) Cable Connections & Setup Procedures 3.1 Data port assignment and pin connections For data input and output connections, please note the following pin assignment: Pin Assignment (Screw Terminal Block) Data format RS422/485 (4-Wire) IN(+) IN(-) OUT(+) OUT(-)
Page 4
NHD110DRMicro Series Quick Installation Guide (5) Operational Guides 5.1 Transmitter LED Indicators Indicator Colour Description Lit when power is supplied to the Transmitter. Green lit when optical signal is active. Lock Red/Green Red lit when optical signal is null and void. Lit when SD-SDI or HD-SDI signal is fed into the SDI IN Green connector.