Summary of Contents for Project Nursery Sleepy Sloth
Page 1
Install Batteries Position the Sloth Place the Sloth on the top rail of the crib. Wrap the straps around the crib rail and fasten them so that the Sloth remains securely in place. The Sleepy Sloth comes with a built-in stand, pre- Use a flathead installed for easy positioning on a tabletop or other flat screwdriver to open surface. You can also mount the Sloth securely to a crib the battery door on using the straps on the back. the back of the Sleepy Sloth. To mount the Sloth to a crib: Remove the Sloth’s Unfasten the straps on Insert 3 AA batteries stand by pulling it the back of the Sloth. (not included). gently off the bottom of the Sloth. Put the battery door back in place and screw it shut. IMPORTANT: The Sleepy Sloth comes with a dome cap you can use when you don’t want to project on the wall or If you’re mounting to a crib: ceiling. If you do want to project onto the wall or ceiling, Make sure the Sloth’s dome...
Page 2
Everyday Use PNCP100 QSG 02 USING THE TIMER Sleepy Sloth The built-in timer automatically turns off the projector The Sleepy Sloth offers soothing sounds, a projector, and and soothing sounds at the end of the period you set (15, a gentle nightlight for your little one’s bedtime. 30, or 60 minutes). Sound Soothing Crib Projector To turn on the NIGHTLIGHT: Press the button. Press To turn the TIMER on: Press the button. The indicator again to change the intensity of the nightlight (low, lights on top of the sloth show you the length of the Quick medium, high, and off). Press and hold the button to current timer. turn off all sounds and lights. USING THE BUMP SENSOR To turn on SOOTHING SOUNDS: Press the...