Advertisement
Quick Links
351/352 DucTester QuickGuide
Umbilical
DucTester
Extra
tubing
Unpack, connect gauge
QG351
DM32 gauge
(Battery included)
Check boxes for each step.
□
Remove everything from the case.
□
Press
screen, and check the battery state
indicator at the top right:
□
If the battery display is not green, connect
USB to power outlet to charge the gauge.
□
Connect yellow, green and blue tubes
to the gauge.
www.retrotec.com
Support: (888)330-1345
Gauge case
Tubing
Accessory Kit
on the gauge, then tap the
International: +1(604)732-0142
Page 1 of 4
Range Plugs
QuickGuides
Battery Charger
Gauge remains connected
like this for all tests.
Made in Everson, WA, USA
rev-2014-05-13
Advertisement
Related Manuals for Retrotec DucTester 350
Summary of Contents for Retrotec DucTester 350
- Page 1 USB to power outlet to charge the gauge. □ Connect yellow, green and blue tubes to the gauge. Gauge remains connected like this for all tests. www.retrotec.com Support: (888)330-1345 International: +1(604)732-0142 Made in Everson, WA, USA QG351 Page 1 of 4...
- Page 2 Prepare the gauge Step 2: Connect to ducts Make sure DucTester 350 is showing on the □ Turn off air-handler Home screen. and remove all filters. If not, tap the fan picture, then , tap DucTester 350, then select the range that you have installed.
- Page 3 Step 2: Connect to ducts (cont’d) Total Duct Leakage Test: Depressurize □ Ready to conduct the test by depressurizing the ducts: Connect Flex Duct Adapter to fan inlet for depressurization. Exhaust depressurize airflow Inlet with Range Plugs inside the Adapter To pressurize, connect the Flex Duct Adapter to fan exhaust.
- Page 4 Get the results you need Step 5: Desired results not achieved? □ Tap the [Channel B] key to select a different Flow reads “--” at test pressure? Result, or tap the [Result to be displayed] key If the test pressure has been reached, but “--” appears, on the [Settings] menu.