Related Manuals for Silver King SKBC65
Summary of Contents for Silver King SKBC65
-
Page 1: Replacement Parts List
Technical Manual Replacement Parts List Horizontal Bottle Coolers 1600 Xenium Lane North, Minneapolis, MN 55441-3787 Phone (763) 923-2441 MODELS SKBC50 Specifications Subject to Change Without Notice. SKBC65 SKBC95... -
Page 2: Installation
Please read this manual and the accompanying warranty information before operating your new Silver King unit. Be sure to complete and mail the warranty card within 10 days of purchase to validate your warranty. INSPECT FOR DAMAGE AND UNCRATE Upon delivery of your new Silver King unit, uncrate at once to inspect for possible freight damage following the instructions printed on the exterior of the container. -
Page 3: Maintenance
Allow the unit a minimum of one hour to respond to a control setting adjustment. Defrost Your Silver King bottle cooler is an automatic defrost unit and no additional plumbing is required. Automatic defrosting is accomplished when frost buildup on the Evaporator Coil is cleared during Compressor "off" cycles. Defrost water is collected in a pan located in the compressor compartment where it is evaporated into the room air. - Page 5 REPLACEMENT PARTS LIST – MODELS SKBC50, SKBC65, SKBC95 FOR EQUIPMENT WITH SERIAL NUMBERS STARTING WITH ‘S’ ONLY ITEM DESCRIPTION NUMBER GRILL, FRONT (BLACK) GRILL, FRONT (STAINLESS) GRILL, REAR (BLACK) GRILL, REAR (STAINLESS) CONDENSER COVER CONDENSER COIL CONDENSER FAN MOTOR 115V...
- Page 6 FORM NO. 29470 REV F...