Qlight EPLUS Series Quick Start Manual

LED Work Lights
EPLUS Series
25 55
20
Thank you for purchasing Qlight's products. Please read this user manual
carefully prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a
loss of life or serious physical injury.
1. During wiring or maintenance, please completely turn off the
power of the product. (Failure to follow this may lead to an electric
shock.)
2. Do not install the product in locations that subjects it to excessive
dust or water other than the conditions designated by the IP
protection ratings indicated for each product. (Failure to follow
these instructions may cause a fire to the product, electric shock,
physical injury, malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service
is required, please contact your local Qlight contact point.
(Failure to follow these instructions may lead to fire, electric shock,
or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow
these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives
or property, please make sure to have a double safety device.
(Failure to follow this may cause damage to property, fire, electric
shock and loss of life.)
Ordering Specifications
EPLUS -
[Model number] [Product length]
 |
EPLUS
Dimensions
Model number
EPLUS300
EPLUS450
300 - 24
[Voltage]
| |
300-316mm
24-DC24V
450-466mm
(Units : mm)
EPLUS
L
L
316
466
Precautions for Correct Use
Failure to follow the proper instructions may cause
damage to property, the product, or malfunction of the
product that would void the warranty.
1. Please remove any objects that can interrupt ventilation
around the product.
2. Please turn off the power of the product immediately if it fails
to operate properly.
3. Carefully wire the product according to each product's
specification.
4. Please be careful in preventing chemicals such as thinner,
benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause
malfunction or damage to the product, fire, and electric
shock.
Product Specifications
■ Optics Specifications
EPLUS300
Model number
Lens Color
Directions
Light color
Luminous flux DC
Efficacy(lm/W) DC
■ Specifications
EPLUS300
Model number
Voltage
Range for operation
voltage
Power
DC24V
consumption
Min. 100MΩ(500V DC mega ohm meter)
Insulation resistance
DC:500VAC, 60Hz, 1minute/AC:1,500VAC,
Withstanding voltage
Operating temperature
Protection rating
Materials
Certification
Weight(Approx.)
EPLUS450
Translucent
Cooldaylight
6,000-6,500K
800lm 1,000lm
200Lux 200Lux
EPLUS450
DC24V
DC24V
8W 10W
60Hz,1minute
-25°C to +55°C
IP20
Housing-Al, Lens-PC
0.22kg 0.23kg
Please scan the QR code for more
detailed product information.
www.qlight.com