WAREMA Omnexo 2M230 REG Installation Instructions

Omnexo switch actuator
2/4/6M230 REG
Installation instructions
General information
Fig. 1 Omnexo switch actuator 2/4/6M230 REG
The Omnexo switch actuator 2/4/6 M230 REG is a device
for the central operation of up to six sun shading drives
(the following uses the sun shading actuator for six motors
as an example).
It is operated via the Omnexo control system. The drives
and switch actuator are supplied with 230 V AC.
The Omnexo switch actuator 2/4/6M230 REG functionality
can be set. The control behaviour can be adjusted to the
different requirements of the various products.
Controlling the light and load is not permitted and
will result in a device fault.
Intended use
The Omnexo switch actuator 2/4/6M230 REG s an
electronic device for controlling sun shading devices. The
approval of the manufacturer must be obtained for any use
of the device other than its intended purpose specified in
these instructions. The sun shading actuator is intended for
installation in enclosed electrical operating facilities.
Safety instructions
W ARNING
The electrical installation (assembly)/
dismantling must be performed by a
certified electrician in accordance with
VDE 0100 and/or with the standards
and legal requirements pertaining to
the respective country. The electrician
must observe the installation notes and
instructions included with the electrical
devices supplied.
W ARNING
If hazard-free operation cannot be assumed,
the device must not be started or must be
deactivated. This assumption is justified if
warema_2052441_alhb_en_v2•2023-04-01
 the housing or the connecting lines show
signs of damage
 the device is no longer working.
W ARNING
It is important to comply with the following
points in the interest of personal safety.

Children may not play with the operating elements of
the control unit or the remote control. Store remote con-
trols out of reach of children.
 Make sure that no persons or objects are in the path
of the driven parts (venetian blinds, external venetian
blinds, etc.).
 Disconnect the device from the operating voltage if
cleaning or other maintenance work must be per-
formed.
C AUTION
When using window drives, the installer
of the system must ensure that the
safety regulations and precautions of
DIN EN 60335-2-103 "Particular requirements
for drives for gates, doors and windows"
as well as ASR 1.6 "Windows, roof lights,
transparent walls" are observed.
W ARNING
The switch actuators may only be used
to control such window drives where the
movement of the window cannot cause any
injuries.
Function of the sun shading actuator
You will find a detailed description of the functions for
Omnexo sun shading actuators in the Omnexo software.
The software is available to download at
www.warema.com/en/omnexo/.
Installation
The device is intended for installation in a distribution
cabinet. The device is mounted by clipping it onto a DIN
rail (TH 35-15).
We reserve the right to make technical modifications
Valid from
1 April 2023
Keep for future use.
1