Elitex WGT 5 Installation Instructions Manual

Application
The WGT fits independent from pipe manufacturer as a sealing
element for all listed sizes. The WGT seal off water and gas in
microducts with various cable diameters and works also like a
blind plug. Beside excellent sealing performance the WGT also has
good strain relief for cable and microduct. With the optional PowerClip
the strain relief improve by clamping the strength members like
aramid yarn. At the cable side the WGT has an integrated shape for bend
protection. Please also refer to the technical data sheets for the products.
Scope of delivery
Every WGT housing comes with a sealing gasket
according to the selected cable size. The sealing
gasket has two functions. It works as a blind plug for
empty microducts and as a seal for the cable.
Sealing gaskets
Various sealing gaskets for different microducts and applicable cable diameters
are available. Please refer to the table with available sizes on last page.
Customer specific gaskets are available on request.
PowerClip
If fixation of strain relief elements
of the cable is required, the PowerClip
is the right choice.
Tools
For every size of WGT a disassembly clip is available.
For most sizes also a professional installation tool is
available. The tool simplifies assembly and disassembly
of the WGT especially if the cable is already in place.
The WGT can be installed without using the tool but
for disassembly, at least for WGT size 5mm, 7mm and
thin cables, the use of the PullClip
is strongly recommended.
PullClip Order No.
WGT 5mm 01-044-01 A
WGT 7mm 01-045-01 A
WGT 10mm 01-046-01 A
WGT 12mm 01-047-01 A
WGT 14mm 01-048-01 A
WGT 16mm 01-049-01 A
WGT 5/7/10/12/14/16/20
Assembly Pliers Order No.
WGT 7mm 01-038-01 A
WGT 10mm 01-039-01 A
WGT 12mm 01-040-01 A
-
-
1
Shut Version
Water Gas Termination
I N S T A L L A T I O N I N S T R U C T I O N
PowerClip
-
WGT 7mm-
WGT 10mm
WGT 12mm
- -
- -
Order No.
-
01-011-01-A
01-008-01 A
01-009-01 A
-
-