Pro-Line II 39200 Operating Instructions

FAUTEUIL BIG & TALL DELUXE À HAUT DOSSIER
ÉTAPE 1 ÉTAPE 2
3
2
1
ÉTAPE 4 ÉTAPE 5
6
10
7L
7R
11
10
5
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier que les quantités des
pièces reçues sont correctes.
ÉTAPE 1 Insérer cinq roulettes (1) dans la base (2). Poussez fort jusqu'à ce que vous entendiez ou sentiez la roulette (1) s'enclencher. Insérer le
vérin pneumatique (3) dans la base (2).
ÉTAPE 2 Fixez la plaque du siège (4) au coussin du siège (5) avec la flèche vers l'avant du fauteuil. Fixez la plaque du siège (4) à l'aide de quatre
vis pour plaque de siège (8 et 9).
SERREZ COMPLÈTEMENT TOUTES LES VIS À L'AIDE D'UNE CLÉ ALLEN (12).
ÉTAPE 3 Placez le siège assemblé sur le dessus du vérin pneumatique (3) et appliquez une pression vers le bas.
ÉTAPE 4 Fixez les bras (7L et 7R) au coussin du siège (5) à l'aide de deux vis pour bras (10) pour chaque bras (7). NE SERREZ PAS COMPLÈTEMENT
LES VIS. Fixez le dossier (6) aux bras (7L et 7R) à l'aide de deux vis pour bras (10) pour chaque bras (7). APPLIQUEZ UNE PRESSION FERME
POUR ALIGNER ET SERRER COMPLÈTEMENT TOUTES LES VIS À L'AIDE D'UNE CLÉ ALLEN (12).
ÉTAPE 5 Recouvrez les trous des bras (7L et 7R) à l'aide de quatre capuchons en plastique (11) pour chaque bras (7).
ATTENTION : ASSUREZ-VOUS QUE TOUTES LES VIS SONT COMPLÈTEMENT SERREES AVANT D'UTILISER LA CHAISE.
39200 / 39203
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
9
8
4
5
PIÈCES
1. Roulette . . . . . . . . . . . . . . . . . . . . . . . 5
2. Base . . . . . . . . . . . . . . . . . . . . . . . . . 1
11
3. Vérin Pneumatique . . . . . . . . . . . . . . . 1
4. Plaque du Siège . . . . . . . . . . . . . . . . . 1
5. Coussin du Siège . . . . . . . . . . . . . . . . 1
6. Dossier. . . . . . . . . . . . . . . . . . . . . . . . 1
7. Bras (7L et 7R) . . . . . . . . . . . . . . . . . . 2
8. Vis pour Plaque du Siège. . . . . . . . . . . 2
9. Vis pour Plaque du Siège. . . . . . . . . . . 2
10. Vis pour Bras . . . . . . . . . . . . . . . . . . 8
11. Capuchons en Plastique . . . . . . . . . . 8
12. Clé Allen (non montré). . . . . . . . . . . . 1
© Office Star Products juillet, 2023
4
3
3
1
QTÉ
PROLINE II LIMITED WARRANTY
ProLine II chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At it's
option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return freight on
components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 400 lbs.
or less. The 54666 is for persons weighing 300 lbs. or less. The 7103M, 7602R, 7605R, 7600R, 81108, 81308 & 81608 are for persons weighing 400 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. All ProLine II are built to meet or exceed ANSI BIFMA standards.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components covered by
warranty will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts.department@officestar.net, by Fax 1-909-930-5629, or
toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 3:30pm. Pacific Time.
39200 / 39203
BIG & TALL DELUXE HIGH BACK CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1).
To lower seat height sit on chair and lift lever (1).
NOTE: It is normal for chair to slightly lower under body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an adjustment that
will allow the user to change the tension of the tilting feature. Turn knob (2)
clockwise to increase tension and counter-clockwise to decrease or ease the
tension. To lock, return chair to the upright position and push lever (1) in. To
unlock pull lever (1) out.
NOTE: Be careful not to loosen the back tilt adjustment knob completely.
ARM HEIGHT ADJUSTMENT
To adjust Arm Height, push button (3) to allow the arms to move up or down
freely. Release button (3) once desired height is reached.
• ARM FLIP UP AND DOWN
To flip arms up, simply pull up on arm. To lower arm, simply pull down on arm.
WARNING
1. Use this product only one person at a time.
2
2. Do not use this chair unless all bolts, screws, and knobs are
securely tightened.
3. Check that all bolts, screws, and knobs are tight every three months
or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover as head
covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.